2021年2月28日 · 1). Connect CAT Comm Adapter 3 (CA3) to Diagnostic Port on the Engine (Key switch: ON).

2019年7月19日 · To connect the Communication Adapter 3 (“Comm Adapter 3”) to the PC, perform the following steps: Step 1: Align and attach the DB25 connector end of the USB PC …

2014年7月31日 · Have you tried all USB ports? If so do you have another PC to plug it into to see if the power light comes on? If this CA3 has current firmware in it the USB port should power it …

The CA3 must be connected to a PC loaded with the latest version of CA3 software and to a data link connection on the machine. Connect CA3 (1) to PC (11) using 370-4617 Cable Assembly …

The CA3 must be connected to a PC loaded with the latest version of CA3 software and to a data link connection on the machine. 1. Connect CA3 (1) to PC (11) using 370-4617 Cable …

After scratching my head for a bit I figured let me try to move the CA3 to a different USB port. The other USB on my CF-19 also did not work. Lastly I tried the CA3 in my 54mm USB 3.0 …

2020年12月12日 · Diagnostic Port on Electronic Engine and Transmission. Test the Connection to the ECM using CAT Communication Adapter 3 Toolkit.

Use CAT Communication Adapter 3 Toolkit to test the connection between the CAT Communication Adapter 3 and the ECM Caterpillar Engines. 1. Prepare your PC, and connect …

2019年10月18日 · Latest version is the Communication Adapter 3 2023 A, often referred to as CA3. Today, I was trying to testing the connection between 9-Pin Deutsch SAE Standard …

2006年6月27日 · Regarding these rifles, it's been shown that the rear sight base seems to lack the bump stop in front (going towards the front end) of it that the G3 rear sight base normally …