InfraBuild Steel Centre stocks a wide variety of hot dip galvanised CHS steel. Hot dip galvanized steel tubes are high-strength, cold formed hollow sections that are hot dip galvanized to AS/NZS 4792 and have a minimum average coating mass of 300 grams per square metre applied to both the interior and exterior of the section for superior ...

Circular Hollow Section (CHS) steel tube is a hollow, structural steel length created with hot-rolled coils, welded together once in shape. Due to the uniform geometry of these sections, robust and lightweight characteristics, and relative affordability, CHS …

Cold formed circular hollow sections (CHS) S355J2H according to EN 10219-1 Part of the program are dual certified S355J2H / S420MH according to EN 10219-1 Impact test at -20 degrees celsius thickness >6mm Tolerances according to EN 10219-2 Inspection certificate according to EN 10204-3.1 and is CE-marked Environmental Product Declaration (EPD)

Steel Angles Beams Caging Channels Chequered Plates Circular Section (Pipes) Cold Rolled Steel Cut and Bend Electro-Galvanised Steel (Anti-finger & Phosphate) Flat Bars Galvanised Gratings Galvanised Plates/Sheets Hollow Sections Hot Dipped Galvanised Steel (‘O’/'R’ Spangle) Plates Rebar Accessories Reinforcing Bars Round Bars Sheet Piles Silicon Steel Square Bars Stainless Steel ...

Doogood hot dipped galvanised (HDG) pipes are available in nominal bores of 15mm to 150mm, with thicknesses from 1.90mm to 6.00mm. We stock industry standard lengths from 2.4 metres – 7.20 metres and can fabricate non-standard lengths up to 12m or provide cut pipe to custom lengths in short lead times.

Design aid - Table of design properties for circular hollow steel sections (CHS) including section dimensions, cross-section properties (area A, second moment of area I, elastic modulus Wel, plastic modulus Wpl), strength properties (elastic moment Mel, plastic moment Mpl, plastic shear Vpl), and buckling properties (section class, buckling curves)

This Hot Dipped Galvanized Pole CHS76x3 – 6 m MS HDG is a circular hollow section (CHS) of 76 mm diameter x 3 mm thick x 6 m long. It is made from mild steel (MS) and finished with hot-dipped galvanizing (HDG).

Galvanised hollow sections are categorized into three main types: rectangular hollow sections (RHS), square hollow sections (SHS) and circular hollow sections (CHS). Each type of hollow section has its own attributes and serves a specific purpose. Galvanised hollow sections are in both cold formed and hot finished grades, S275 and S355.

DuraGal® Plus CHS is a high-strength cold formed square hollow section that is galvanized to AS/NZS 4792 and has a minimum average coating mass of 100 grams per square metre …

C.H.S. Steelworks Sdn. Bhd. is a result-oriented, customer-focused and value-driven company. We offer an innovative and value-packed solution that provides quality products, customization and engineering services that cater to the needs of major players in Malaysia's water and wastewater industry. 40460 Shah Alam, Malaysia.