2023年4月19日 · I recently had a student in a pistol class that was shooting a CANIK, TP9SFX, 5.25 pistol. From the first shot he fired he had FTE completely/stove pipes. He started with Sterling 115 grain 9MM and we chronographed it at 1100+. We tried Blazer and Winchester white box with the same results. The f...

2020年10月6日 · shot the 9mm Canik TP9SFx today- 124 grain bullet PF about 135- the installed parts (tungsten guide rod and wolff 14# commander length recoil spring) helped the muzzle rise vs the factory parts. Would recommend them if you are going to use this pistol for competition.

2023年9月25日 · In my original post I said I was going to put in a support request to Canik. I did and told them of my "modifications" because I didn't want them to get it, take one look and send it back. I thought to clear it with them first. They would not accept it. When I did finally get the slide off, I informed them what the issue was.

2020年12月1日 · I have 2 Canik TP9SFx pistols. And they both are set up the same. The ultimate Canik TP9SFx combination for me is. Freedom Smith Triggers W74 Tungsten guide Rods 14 pound Commander recoil springs 29 Newton striker spring Taylor Freelance brass backstraps. My load is 147 grain Blue Bullet on top of 3.2 grains Sport Pistol.

2019年12月10日 · A canik tp9sfx landed in my safe due to black friday. I have read many discussions about changing spring because the pistol is “over-sprung”, however, i have searched for explanations and symptoms of an over-sprung pistol. Can anyone explain these to me? this firearm appears to be a praised budget friendly competition capable gun.

2018年10月29日 · Hello! I own two Canik TP9SFX's. I bought mine and shoot CO with it, and bought another so my wife could shoot the production class with me from time to time. I have been loading bullets at about 130PF, which is fine for an optic. The problem is, when she shoots, her bullets are about 3 inches lo...

2018年8月5日 · Given that the Canik's barrel is longer still, I would guess that you could probably expect to make 130 PF with somewhere around 3.9 or 4.0 grains of N320. Usual rules apply, don't take my experience with a similar but not the same gun as gospel, plunk test your own gun, start low, work up carefully, yada yada yada.

2019年10月7日 · I shot my SFX yesterday with. C-more STS, not a 2. Thought the lens a little small. I have a couple RTS2 on the bench, and wanted to try that. The plate fits, but the sight overhangs the plate and is recessed on the slide, so the RTS2 won’t fit on the gun. So, what sights will fit on this gun wit...

2018年5月2日 · Canik apparently designed those for dry firing pencils to the moon. Since I mentioned spring swaps...ditch the factory block plunger spring and replace it with a Ghost reduced power block plunger spring for a Glock or a reduced power CZ block plunger spring from Cajun Gun Works.

2017年11月14日 · To answer the original question, the stock TP9SFX base pad won't fit in the USPSA or the IDPA SSP/ESP box. Here is my setup. When I asked Kalob at Springer about their baseplates not fitting he said "It doesn't say it will fit every Canik ever made". Well here's what it does say: "SP EZ CZ 9mm base pads - 17 round magazines - Canik TP9V2/EAA SF"