2015年5月19日 · Move the wire out of the way and take your 1/2" with extension and 27mm deep socket, coat the inside of the socket with WD-40 so that it makes removing the sensor from it easier, then wedge it between all the wires and proceed to undo the switch. Where the light is pointing is roughly where you should be looking. 4.

2014年1月12日 · A few people here have mentioned replacing the oil pressure sensor without removing the manifold. I have the "service vehicle soon" light, with random "low oil" that will flip on for a sec but I know the oil is full. How did you do it and with what tools? I was looking at it today after some other mait work.

Hey all and welcome back to another Video on my VY SS, In this video I show you all replacing of the Oil Pressure Switch and then having to replace a unexpec...

2025年1月16日 · In this video we show you what tools you will need and how to replace the oil pressure switch/ sending unit on all LS motors.

2011年1月3日 · Move the wire out of the way and take your 1/2" with extension and 27mm deep socket, coat the inside of the socket with WD-40 so that it makes removing the sensor from it easier, then wedge it between all the wires and proceed to undo the switch. Where the light is pointing is roughly where you should be looking. 4.

2016年3月1日 · The oil pressure sensor for the LS1 engine sits at the back of the engine behind the intake manifold on the driver's side. If you know anything about the LS1 F-Body, the back half of the engine sits under the cowl.

2015年9月2日 · Can anyone please post a photo of where the oil pressure sender is located in the 2000 VT Ls1 Gen 3 5.7 Litre. Got the part, no idea where it is located to change. accentstencil

2009年11月1日 · My oil pressure switch is chucking out an electrical fault. Apprently need a new one. Where can i get one cheap. also after reading topics you need a...

2012年3月30日 · VT II LS1 Oil Pressure switch replacement. Hi guys, My wife's TV II Cluby has flashed up an error code p0523. It maybe just a coincedence but only a week before I did an oil change and for the first time I used Penright oil instead of Mobil 1. Having said that, I am thinking I should start by changing the oil pressure switch.

2015年3月9日 · To be clear no "normal" , "Impact" nor "cheap" socket will do the job you need the "correct" LS Oil sender one to do the job properly. Reason being using anything else will risk damaging the electrical connector that sits directly on top of the sensor!! The only suitable alt. would be a deep box spanner or deep socket perhaps?