View and Download Hochiki CHQ-BS programming instructions online. CHQ-BS security system pdf manual download.

To program a CHQ-BS firstly connect the plug of the lead in to the remote programming socket of the TCH-B100 address programmer, and connect the black croc- clip to the C terminal, and the red croc-clip to the L terminal on the Base Sounder. The address can now be programmed in the same way as an ASX range sensor.

Therefore a CHQ-S (switch monitor) for example, may have a main address of 123, input 1 sub-address at address 123.1 and input 2 at address 123.2. The sub-addresses can be treated as if they were individual addresses, and each can be allocated to any zone, given

chq-wsb2 An Addressable Loop-Powered Wall Sounder Beacon, featuring an integral beacon within the horn which utilises high intensity LED technology. Available in Red or White case with either Red or White LEDs (four variants).

CHQ-DRC DUAL RELAY CONTROLLER is a loop powered input/output module with two independent N/O and N/C volt free change over relay outputs which can be driven separately. Used for the control of devices such as dampers or for plant and equipment shutdown.

Model YBO-BS is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Base (YBO-R/SCI – from Batch Number 6044) and can be fitted with any of ...

An Addressable Loop-Powered Wall Sounder providing 8 volume levels and 51 tones with a maximum output of up to 102 dB (A) (±2 dB (A)) with low current consumption. Special bases available: YBO-R/3 (RED), YBO-R/SCI (RED), YBO-R/3 (WHT) and YBO-R/SCI (WHT-SNDR). Colours: Red, White.

CHQ-BS - Programming Lead Instructions General Description The enclosed lead must be used for addressing CHQ-BS if they are selected as Wall Sounders. Black Clips Operation-Address Setting To program a CHQ-BS connect the black croc clips to the left hand terminal on the TCH-B100 address programmer and to the C terminal of the

CHQ-AB range consists of addressable loop-powered Beacons, with high-intensity LEDs and a Fresnel lens design which produces a highly visible flash. The casings exactly match the Hochiki ESP Sensor range in shape and color providing seamless integration.

Model YBO-BS (WHT) is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB (A) (±2 dB (A)) with low current consumption.