2020年9月30日 · b. Assign the DHCPv6 pool you just created to interface g0/0/0 on R1. R1(config)# interface g0/0/0 R1(config-if)# ipv6 dhcp server R2-STATEFUL Part 5: Configure and verify DHCPv6 relay on R2. In Part 5, you will configure and verify DHCPv6 relay on R2, allowing PC-B to receive an IPv6 Address.

2022年6月14日 · Explanation: A DHCPv6 client sends a DHCPv6 SOLICIT message to the reserved IPv6 multicast all-DHCPv6-servers address of ff02::1:2. 3. What DHCPv6 message does a host send to the DHCPv6 server if it is using stateful DHCPv6?

2020年6月4日 · DHCPv6 Server – Router provides stateless or stateful DHCPv6 services. DHCPv6 Client – Router interface acquires an IPv6 IP configuration from a DHCPv6 server. DHCPv6 Relay Agent – Router provides DHCPv6 forwarding services when the client and the server are located on different networks. 8.4.2 Configure a Stateless DHCPv6 Server

2022年6月14日 · 5. An IPv6-enabled router is to acquire its IPv6 GUA from a DHCPv6 server. Which interface configuration command should be configured on client router? ipv6 address autoconfig; ipv6 address auto config; ipv6 address dhcp; ipv6 address dhcpv6

2021年3月23日 · Host sends a DHCPv6 SOLICIT message. The client, now a DHCPv6 client, needs to locate a DHCPv6 server and sends a DHCPv6 SOLICIT message to the reserved IPv6 multicast all-DHCPv6-servers address of ff02::1:2. I think that the quiz has the wrong answer.

2022年7月12日 · Stateful DHCPv6 uses more memory resources. Answers will vary, but Stateful DHCPv6 requires the router to store dynamic state information about the DHCPv6 clients. Stateless DHCPv6 clients do not use the DHCP server to obtain address information, so this information does not need to be stored. 2.

2020年6月29日 · IT Questions Bank › Category: CCNA › A network administrator has configured a router for stateless DHCPv6 operation. However, users report that workstations are not receiving DNS server information. Which two router configuration lines should be verified to ensure that stateless DHCPv6 service is properly configured? (Choose two.)

2022年7月13日 · In Part 3, you will test and verify that Stateless DHCPv6 is working correctly on the network. You will need to use the correct IPv6 CLI commands on the router to determine if Stateless DHCPv6 is working. You may want to use debug to help determine if the DHCP server is being solicited. Step 1: Determine if Stateless DHCPv6 is functioning ...

2020年3月8日 · Match the descriptions to the corresponding DHCPv6 server type. (Not all options are used.) Exam with this question: CCNA 2 v7 Checkpoint Exam: Available and Reliable Networks Exam Answers Exam with this question: CCNA …

2020年3月8日 · Match the DHCP message types to the order of the stateful DHCPv6 process when a client first connects to an IPv6 network. (Not all options are used.) Exam with this question: CCNA 2 v7 Checkpoint Exam: Available and Reliable Networks Exam Answers