Sep 30, 2020 · b. Assign the DHCPv6 pool you just created to interface g0/0/0 on R1. R1(config)# interface g0/0/0 R1(config-if)# ipv6 dhcp server R2-STATEFUL Part 5: Configure and verify DHCPv6 relay on R2. In Part 5, you will configure and verify DHCPv6 relay on R2, allowing PC-B to receive an IPv6 Address.

Jun 14, 2022 · Explanation: A DHCPv6 client sends a DHCPv6 SOLICIT message to the reserved IPv6 multicast all-DHCPv6-servers address of ff02::1:2. 3. What DHCPv6 message does a host send to the DHCPv6 server if it is using stateful DHCPv6?

Jun 14, 2022 · 5. An IPv6-enabled router is to acquire its IPv6 GUA from a DHCPv6 server. Which interface configuration command should be configured on client router? ipv6 address autoconfig; ipv6 address auto config; ipv6 address dhcp; ipv6 address dhcpv6

Jun 4, 2020 · DHCPv6 Server – Router provides stateless or stateful DHCPv6 services. DHCPv6 Client – Router interface acquires an IPv6 IP configuration from a DHCPv6 server. DHCPv6 Relay Agent – Router provides DHCPv6 forwarding services when the client and the server are located on different networks. 8.4.2 Configure a Stateless DHCPv6 Server

Jul 12, 2022 · e. Set the DHCPv6 network discovery (ND) other-config-flag. R1(config-if)# ipv6 nd other-config-flag R1(config-if)# end Step 2: Verify DHCPv6 settings on interface G0/1 on R1. Use the show ipv6 interface g0/1 command to verify that the interface is now part of the IPv6 multicast all-DHCPv6-servers group (FF02::1:2).

Mar 23, 2021 · Host sends a DHCPv6 SOLICIT message. The client, now a DHCPv6 client, needs to locate a DHCPv6 server and sends a DHCPv6 SOLICIT message to the reserved IPv6 multicast all-DHCPv6-servers address of ff02::1:2. I think that the quiz has the wrong answer.

Jul 13, 2022 · In Part 3, you will test and verify that Stateless DHCPv6 is working correctly on the network. You will need to use the correct IPv6 CLI commands on the router to determine if Stateless DHCPv6 is working. You may want to use debug to help determine if the DHCP server is being solicited. Step 1: Determine if Stateless DHCPv6 is functioning ...

May 13, 2021 · IT Questions Bank › Category: CCNA › A network administrator has configured a router for stateless DHCPv6 operation. However, users report that workstations are not receiving DNS server information. Which two router configuration lines should be verified to ensure that stateless DHCPv6 service is properly configured? (Choose two.)

Mar 8, 2020 · A company uses the method SLAAC to configure IPv6 addresses for the workstations of the employees. A network administrator configured the IPv6 address on the LAN interface of the router.

Dec 21, 2019 · The state is not maintained by the DHCPv6 server under stateless DHCPv6 operation. Explain: Under the stateless DHCPv6 configuration, indicated by the command ipv6 nd other-config-flag, the DHCPv6 server does not maintain the state information, because client IPv6 addresses are not managed by the DHCP server.