2018年3月18日 · Put thin slices of foamy material (from packaging) or rubber between fans and heatsink to reduce vibration from noise. Fasten the fans with whatever, but I took long twist ties, of which I have quite a few from electronics packaging. They don't spontaneously break and they cost nothing. I did this with an Asus R9 280x DirectCu2, works great.

显卡风扇接到主板4针SYS_FAN风扇接口，注意黑色线的位置和方向。显卡风扇坏，又想在win系统控制风扇转速就考虑这么做

2020年1月31日 · I created a custom shroud for my graphics card so I could replace the stock 80mm fans with 120mm fans. Since the mod was fairly simple, I figured others would be interested in it as it won't void any warranty or require a full teardown. I did this mod on my Zotac 1070ti AMP because the default fa...

Step 1: Taking Apart the GPU (EVGA 650 TI Boost) take out all the screws, if you happen to have a 650 ti boost then i have them highlighted for you. Step 2: Pint Out and Testing

2017年11月29日 · If you find you're getting a big difference then turning your PSU to have the fan draw air away from the GPU could help. You can also make sure your case has more air intakes than exhausts and have a fan blow some air towards the card. Last option is to nuke it, get a custom loop and never ever worry about how much air your GPU is getting.

2023年4月26日 · This is intended to be a general guide to swap/upgrade most stock GPU fans with aftermarket RGB fans/Noctua fans as a cleaner alternative to deshrouding your GPU and zip tying fans to it.

2023年3月31日 · I finally decided to try and diy something better myself and after seeing that ltt video where they strapped some fans to a gpu, I went with that. I found these 92mm Noctua fans which seemed like they were about right, and once I got them, they were absolutely perfect. I couldn't have imagined a better fit.

2017年1月9日 · My friend has a GPU with a broken fan, i want to replace it with another fan i've scrapped off of an old computer. They are similar in size and type but the plug is different. My question is would it be safe to put connector A unto fan …

2022年1月21日 · One proven idea is to have rear intake through the PCIe slots below the GPU. There are even some 3d printable shrouds that you can have made. But you can also just DIY with some plastic or...

速度翻倍：让NAS的2个2.5G网口实现速度叠加，以极空间Z4 Pro为例