2016年7月27日 · Recirculating the mash is a simple step that can really make a big difference in the clarity and quality of your brew. Making the time or investment to perform this step correctly will help you to set up a proper filter bed in your mash, which will remove unwanted solids and proteins from your beer.

2021年11月27日 · Discover why you should build DIY mash tuns, save money, avoid the hassle of repurchasing brewing supplies with these homemade mash tun plans

The easiest way to recirculate, and this is the method our 15-minute recirculation folks may use, is to get 2 large pitchers, preferably a gallon or so with a handle on it (remember the wort is hot). Put a hose on the outlet for your mash tun, crack the valve just a bit and allow your wort to trickle out into your pitcher.

2021年11月29日 · If you want to recirculate with a cooler mash tun, you are better off with a HERMS system so that you have a point of heat input to your system to offset the heat loss from recirculation. This requires an additional heat exchanger at the opposite end of …

2021年2月8日 · In order to recirculate the mash, you will need a brewing pump, silicone tubing, and a method to carefully return the hot wort over the mash tun. A common misconception of BIAB mash recirculation is improved efficiency. Only a finer crush and proper mashing temps will impact BIAB efficiency.

Build Your Own Stainless Steel RIMS (Recirculating Infusion Mash System) Tube - Round 2: A while ago I built a portable stainless steel RIMS tube and I published this instructable outlining the process so that others could build their own.

Modifying the mash tun. Our mash tun, a simple Gott or Rubbermaid cylindrical cooler, gets its filtration from two pizza screens (available at restaurant food supply stores everywhere) with two pieces of bronze screen sandwiched between them. To provide an exit, I constructed a bulkhead fitting to replace the original spigot.

2015年1月28日 · I have a 5 gallon mash tun and it tops out at 12 to 12.5lbs of grain with a 1.25:1 liquor to grist ratio. After two rounds of batch sparing I have enough wort for a 5 gallon batch easily. I'm limited on gravity, but it's definitely big enough for most beer styles.

2015年6月8日 · A HERMS setup recirculates the mash through a heat exchanger coil suspended in a vessel containing heated water, usually the hot liquor tank (HLT). The temperature of the water in the HLT is thus transferred to the mash indirectly through the coil. A HERMS rig can be either gas or electric.

2018年10月9日 · The idea behind a RIMS (Recirculating Infusion Mash System) is that you utilize a pump to recirculate the mash in the mash tun over some sort of direct heat. The direct heat can be either an electric heating element or over a gas burner.