2018年8月10日 · The goal of this sensor pod is to achieve high accuracy 3D reconstruction using a pair of high resolution XIMEA stereo cameras and a Velodyne LiDAR. The device can also provide thermal information using the onboard FLIR thermal camera.

2023年3月24日 · There are some extra bells and whistles that REM pods add, like temperature sensors. But with REM pods frequently retailing for $170–200, many people opt to make their own from a cheap...

2023年3月27日 · building up skills (soldering, building electrical circuits, basic coding) to make DIY projects, including some ghosthunting gadgets I want to make; incorporating my art into paranormal investigation; getting a novel into publication- or submission-ready shape.

Check out this easy to build rem pod! Uses door vibration sensor device (do a search on the typical sites, they’re not very $$), a radio antenna and an LED! Requires just a bit of drilling,...

2022年4月8日 · For $65 or $70, you get more capabilities with a home-brew pod, digital thermometer and the logger. DIY REM POD. The video below shows how to build a rem pod on the cheap. You might be able to get away with a cost as low as $12 for the alarm unit and use parts on hand to finish it off! Enjoy!

2023年5月29日 · There are some extra bells and whistles that REM pods add, like temperature sensors, etc. But with REM pods frequently retailing for $170-200, many people opt to make their own from a cheap theremin kit. My plan is to use the Madlab Junior DIY theremin kit, which seems to be the most popular way to do it. My gameplan for building a DIY REM pod

I made a new Ghostdetector aka Rempod including temperature and barometric pressure sensing.This device permanently monitors temperature and air pressure an ...

2021年3月27日 · It's a four layer board and I have no manual but the sensor seems to be connected to ch1 and ch2 through two opamps. I connected your probe to the ADC data and control lines. Once triggered, the timings are clean but a read always outputs a 0FFh even with the sensor(PTC) connected. I then triggered on a write to get the mux mode control byte.

DIY Sensors: Sensors are some of the most important parts electronics. If a robot can't react to the world around it, why even make one? Since some sensors can be expensive, here is a collection of do it yourself projects that should lower the price.

[HEX]POD by eBender ⚠️ This project is in development. Iterative design process. GitHub Instagram The [HEX]POD is a portable, multi-purpose, intelligent, environmental, multi-sensor development platform with focus on being a 'Digital Nose' with relatively cheap components, using Sensor fusion and Neural Networks to discern different ...