Jun 23, 2016 · I was just setting up my new M600. Despite there not being a working instruction video (please make one), the build went fine. However when it got time to update, the update got to 99% and stalled. Then it went to 100% and said update failed "Retry". It had a series of battery errors saying "Can't get loader status". Went in to verify the update was still needed, and it was. Tried update for a ...

Apr 18, 2017 · Hello,I mounted the A3 Pro on my M600,but during flight this error shows up: (Extend IMU1 data exception please check IMU installed correctly) (Extend IM ...

Apr 8, 2017 · Any experiences with the 600 in high winds? 20-25 mph? I understand the max wind resistanve value is ~18 mph...

Aug 26, 2019 · The right landing gear servo is stalling when the landing gear is retracted on our M600. Sometimes this stall is overcome and the landing gear reaches full retraction, while other times it stalls long enough that the landing gear reverses and returns to the landing position. When raised on a platform, the indicator light goes red for a second or so while the servo stalls during leg retraction ...

Mar 2, 2017 · Hello everyone, I took advantage of the maintenance tasks, I have perform that week on the M600, to make a video and share it. Hoping that it could help. (there is as well the replacement of the landing gear calble at the end) This should be very similar for the Matrice 600 pro. Have a good day, Stéphane

Nov 3, 2018 · Hi everyone, We run 2 M600 pro and one M600 for surveying with a payload respecting the specifications. In the last 2-3 months we had at least 4 occurences of a propeller screw head popping off during flights on the pro version. After the first time, we started inspecting the propellers between each flights and replacing the ones with missing screw heads with a whole new set of propellers ...

Aug 4, 2016 · The FAQ on the Mcatrice 600 product page, now says that Guidence supports the M600+A3. Previously it said something to the effect of "stay tuned" Personally, I'm only interested in the downward facing camera for visual positioning. The side facing obstacle avoidence would be nice, but its not critical. Questions: - Does ANYONE have any information at all about Guidance on an M600. - Is it ...

Apr 30, 2018 · Something is wrong and it's not the batteries themselves.We were 9.5hrs from home on a remote job site. The M600 flew 4 missions perfectly the previous day. T ...

Sep 6, 2016 · Hello! Just got our Matrice 600, and when you connect the remote to the drone, it says we have to activate first. Cool. Downloaded Assistant 2 for both Mac and Windows, and when you plug the drone in on either platform, all that comes up is the Lightbridge 2 button. Nothing for the A3 or the M600 itself. Using the latest version 1.05 (also tried .04 on PC), and Windows 10. Any ideas?

Sep 26, 2017 · 8# DJI-Jamie Posted at 2016-11-30 15:27 Yes you are correct that the Inspire 2 will not be able to use the older cameras. The Z30 is compatible with both the M600 and the M600 Pro. Not all the spec pages have been completely updated due to the recent product adds, so I do apologize for the confusion.