This document will hopefully explain how to do just as the title says: Change courtesy tones based on calling DTMF (scripts). Once that is achieved, the magic of Linux can take over and the …

2021年4月30日 · Command mode means send all received DTMF digits to the node number specified (bypassing the local command decoder). Send # to exit command mode, and restore …

2022年1月25日 · This howto explains how the DTMF function decoder works in app_rpt and how to add and change DTMF function codes. The function decoder's job is to collect DTMF digits …

2024年11月12日 · The rpt.conf file contains the node configuration, telemetry (beacons), morse code, audio levels, DTMF commands, etc. The modules.conf file configures the modules that …

2024年6月29日 · DTMF Commands. DTMF commands are placed in any one of three named stanzas. Function stanzas control access to DTMF commands that a user can issue from …

2023年4月3日 · I only noticed tonight when I had someone trying to control a remote link, they couldn’t because DTMF was being supressed. dtmfpropagate… Is there anyway to pass …

2019年11月4日 · We have tried 2 different methods to pass DTMF over our repeater system to control our SRS controllers. (propagate_dtmf and pager tone using COP 48) Our goal is: hit …

2025年1月10日 · Once connected, you can issue DTMF codes to connect/disconnect, and use the PTT button to transmit. Digital Link DTMF Tuning Installation and Configuration. Clone this …

2024年9月1日 · Adding the DTMF command into the Node. The final part is to add in the DTMF commands into your node so that when a user enters the correct DTMF tones it will run the …

CDARIN SYSOPS DTMF COMMANDS. The following commands can only be issued by CDARIN Admins with access to ASL MAIN Allscan Dashboard. All audio spots will play on private node …