iso 3506-1：2020 紧固件 耐腐蚀不锈钢紧固件的机械性能 第 1 部分： 具有规定组别和性能等级的螺栓，螺钉和螺柱

不锈钢螺栓、螺钉和螺柱的机械性能 - 奥氏体和双相不锈钢组（iso 3506-1:2020）

ISO 3506-6 provides general rules and additional technical information on suitable stainless steels and their properties. Fasteners conforming to the requirements of this document are evaluated at the ambient temperature

This part of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 °C to 35 °C. …

ISO 3506-1:2020(E) Introduction The ISO 3506 series consists of the following parts, under the general title Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners: — Part 1: Bolts, screws and studs with specified grades and property classes — Part 2: Nuts with specified grades and property classes

ISO 3506‑6 provides general rules and additional technical information on suitable stainless steels and their properties. Fasteners conforming to the requirements of this document are evaluated at the ambient temperature specified in paragraph 1.

DIN EN ISO 3506-1 - 2020-08 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020); German version EN ISO 3506-1:2020.

2020年8月1日 · This part of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested...

DIN EN ISO 3506-1 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)

2025年3月18日 · 本文件规定了在 10 °C 至 35 °C 环境温度范围内测试时由耐腐蚀不锈钢制成的螺栓、螺钉和螺柱（粗螺距和细螺距螺纹）的机械和物理性能。 它规定了与紧固件的奥氏体、马氏体、铁素体和双相（奥氏体-铁素体）钢种相关的性能等级。 当将螺栓、螺钉和螺柱一起考虑时，本文件中使用术语“紧固件”。 它们的性能。 符合本文件要求的紧固件在第 1 段规定的环境温度下进行评估。 它们可能无法在高温和/或低温下保持规定的机械和物理性能。 注 1 符合本文件要求的 …