The Ford EEC or Electronic Engine Control is a series of ECU (or Engine Control Unit) that was designed and built by Ford Motor Company. The first system, EEC I, used processors and components developed by Toshiba in 1973. It began production in 1974, and went into mass production in 1975. It subsequently went through several model iterations.

2003年1月21日 · I was working on a list over on the MS forum of 2.3T specific ECUs (EEC-IV) and what vehicles they came in and thought it might be a good idea to include them here as well. I've also added which VAM air meter matches each ECU as well. Hope this info can be a helpful source of information.

2005年9月25日 · I am building a Road Track car from scratch (Probably the body of an 87 LX with turbo swap). I want to run a trubo'd 2.3 with high boost and be able to fine tune with the tweecer rt.

2016年7月29日 · Are you talkin' about ENGINE schematics that include the EEC module, Shay? If so, Chris Roth (TurboFord founder) still hosts a fairly-large collection of schematics for a number of different turbo Fords. <font color=blue> HERE </font> is the parent directory (click on whatever schematic/circuit interests you). :thumbup:

Scott Hall’s EEC-IV adapter board kit allows you to install MegaSquirt into virtually any Ford vehicle that uses an EEC-IV computer, without cutting a single wire. To get started, you’ll need both the kit and a donor EEC-IV ECU. You will first need to disassemble the donor ECU and desolder the main ECU connector from it.

2007年1月9日 · ECA is a generic term that stands for Electronic Control Assembly = EEC in our case. Other generic terms for the same thing are ECU = electronic control unit, ECM = electronic control module, and these days, PCM = powertrain control module. My 1988 T-bird fan continuously comes on after I turn the key. I have two new IRCM's from Ford.

2009年12月1日 · If I determine that it is the IRCM or EEC, does anyone know where to get them? Just wanted to know if there is anything I should watch out for. I don't think that Ford would still have them in stock but if anyone could clue me in on where to get one and what to watch out for, i'm all ears. BTW it is for my 88 Turbo Coupe. Thanks tony

2004年2月21日 · If you wanted to get the *most* out of your computer setup, really the only way would be eec tuner/ tweecer. I think the la3 will boot up plug and play with your application, without much trouble (pretty much same setup as im doing right now, minus the cam) ...but a wb02 and eec tuner always help!

The TwEECer is an adapter which connects to the J3 service port of the 1984-2004 Ford EEC PCM, giving you the ability to modify parameters in the calibration data with parameters that match the modifications which you have made to your engine combo. So as you add performance to your car, you can easily match the EEC to your combo.

EECTuning.org is a site for performance enthusiasts interested in modifying and tuning Ford EEC IV / V vehicles.