
EL4032 | EtherCAT 端子模块,2 通道模拟量输出,电压,±10 …
模拟量输出端子模块 el4032 用于输出 -10 到 +10 v 范围内的电压。 该端子模块的分辨率为 12 位,以电气隔离的形式将电压传输给处理设备。 EtherCAT 端子模块的输出通道提供 1 个公共地电位。
EL4032 | EtherCAT Terminal, 2-channel analog ... - Beckhoff …
The EL4032 analog output terminal generates signals in the range between -10 and +10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common ground potential. The EL4032 combines two channels in one housing.
EL4031, EL4032, EL4034, EL4038 [} 48] One, two, four and eight-channel analog output terminals, -10..+10 V, 12 bit. Foreword 8 Version: 4.6EL40xx 1.2 Notes on the documentation Intended audience This description is only intended for the use of trained specialists in control and automation engineering who
BECKHOFF倍福 模拟量输出端子模块 EL4031/EL4032/EL4132
该端子模块能够为处理层提供分辨率为 12 位(el4031/el4032)或 16 位(el4132)的电气隔离信号。 EtherCAT 端子模块的输出通道具有一个公共的接地电位。 EL4031 是单通道型端子模块,可与 EL95xx 配套使用,特别适用于带有电气隔离接地电位的信号。
前言 EL40xx 版本: 4.69 1.3 文档指南 注意 文件的其它组成部分 本文档介绍特定设备的内容。它是倍福 I/O 组件模块化文档体系的一部分。
EL4032 - Beckhoff Automation
Connection EL4032. Terminal point. No. Comment. Internally connected with connector. Max. current carrying capacity*) Output 1. 1. Output 1-Specified by output power-2. Without function--0 V. 3. 0 V. 7, negative power contact. 500 mA. Shield. 4. Shield (FE) 8, mounting rail. 100 mA **) Output 2. 5. Output 2-Specified by output power-6.
EL4031, EL4032, EL4034, EL4038 - Beckhoff Automation
EL40xx | Analog Output Terminals (12 bit) EL4031, EL4032, EL4034, EL4038. Further Information. EL403x - Introduction; EL403x - Technical data; EL403x - Connection, display and diagnostics
EL4031 EL4032 EL4132 1_2通道 模拟量输出 端子模块 -10_10V …
EL4031、EL4032 和 EL4132 模拟量输出端子模块用于输出 -10 到 +10 V 范围内的信号。 该端子模块能够为处理层提供分辨率为 12 位(EL4031/EL4032)或 16 位(EL4132)的电气隔离信号。 EtherCAT 端子模块的输出通道具有一个公共的接地电位。 EL4031 是单通道型端子模块,可与 EL95xx 配套使用,特别适用于带有电气隔离接地电位的信号。 EL4032 和 EL4132 型端子模块有两个通道。 输出端由 24V 电源供电。 EtherCAT 端子模块的信号状态通过 LED 指示。
The EL4032 analog output terminal generates signals in the range between -10 and +10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common ground potential. The EL4032 combines two channels in one housing.
EL4032 PLC Programming Terminal by BECKHOFF - Radwell …
EL4032 PLCs/Machine Control from BECKHOFF In Stock, Order Now! Same Day Shipping, 2-Year Warranty - ANALOG OUTPUT TERMINAL, ETHERCAT TERMINAL, 2 CHANNEL, -10 TO +10 V SIGNAL VOLTAGE, 24 VDC SUPPLY, 12 BIT, 2-WIRE (SINGLE-ENDED), IP20
- 某些结果已被删除