The EL9110 potential feed terminal with diagnostics enables the setup of different potential groups with the standard voltage 24 V DC. The supply voltage is taken up via the front terminal contacts and passed through to the adjacent terminals via the internal power contacts.

带诊断功能的供电端子模块 EL9110 能够建立带标准 24 V DC 电压的电位组。 它通过端子模块正面触点接入电源，并通过内置的电源触点连通至相邻的端子模块。

The EL9100, EL9110 and EL9190 feed terminal can be positioned at any location between the input and output terminals for establishing a further potential group or for supplying the terminals following on the right in applications with high current load. The E-Bus is looped through.

See the corresponding chapter in the EtherCAT system manual (Link) for the relationships. Beckhoff also stores the eBIC in the ESI‐EEPROM. The eBIC was introduced into Beckhoff IO production (terminals, box modules) in 2020; as of 2023, implementation is largely complete. The user can electronically access the eBIC (if present) as follows:

Process data (only EL9110) The EL9110 has a bit width of 1 bit (diagnosis bit for the power contacts voltage, "PowerOK") and is displayed in the TwinCAT tree as follows:

The EL9110 power feed terminal makes it possible to set up various potential groups with the standard voltage of 24VDC. In order to monitor the supply voltage, the terminal with diagnostics function report the status of the power feed terminal to …

EL9100, EL9110, EL9190 - Introduction and Technical Data© 2023 Beckhoff Automation

The EL9110 potential feed terminal with diagnostics enables the setup of different potential groups with the standard voltage 24 V DC. The supply voltage is taken up via the front terminal contacts and passed through to the adjacent terminals via the internal power contacts.

供电端子模块 EL9100 能够建立带标准 24 V DC 电压的电位组。 它通过端子模块正面触点接入电源，并通过内置的电源触点连通至相邻的端子模块。 E-bus 通过常规方法与相邻的端子模块连接。 电源 LED 用于指示端子模块的工作状态。 *s：实心线；st：绞线；f：带线鼻子. 供电端子模块 EL9100 能够建立带标准 24 V DC 电压的电位组。 它通过端子模块正面触点接入电源，并通过内置的电源触点连通至相邻的端子模块。 E-bus 通过常规方法与相邻的端子模块连接。 电源 LED.

The EL9100 / EL9110 / EL9190 feed terminal can be positioned at any location between the input and output terminals for establishing a further potential group or for supplying the terminals following on the right in applications with high current load...