2018年10月9日 · The system downloads an RDP file to the client computer, and the browser activates the operating system’s native RDP client to proceed with the connection. The system uses HTTP to connect to BIG-IP APM over HTTPS and RDP (port 3389) to connect to the Terminal Server.

Host Name - Type the host name and, in the Port field, type a port number. Note: For Citrix and VMware View, the standard port is 80 and for Microsoft RDP, the standard port is 3389. IP Address - Type the IP address and, in the Port field, type a port number.

2020年5月20日 · Hi All, I have VIP configured for port 3389 and the pool members are also configured with port number 3389 [TCP]. I need to configure customized healt...

2015年9月21日 · When the requested port is port 799 or port 3000, the BIG-IP system accepts the connection. When the port requested does not match either of those ports, the BIG-IP system rejects the connection and sends a reset to the client.

2016年3月30日 · By default, our fist tunnel using 3390 port because, I think, the destination terminal are mapped to 3389. What's current app tunnel does by default: client IP/tunnel port 127.0.0.1:3390 <---> BigIP <----->terminalserveraddress:3389

2019年7月22日 · When BIG-IP redundant systems are configured to use network failover, the systems communicate over the configured failover addresses. The following table displays the transport protocol and service port used for BIG-IP network failover.

2022年8月5日 · Windows安全扫描报出3389端口漏洞，这个端口是远程桌面端口，因此也不能关闭，采用增强SSL的方式解决，解决方法如下。 一、win+R运行，输入gpedit.msc进入本地计算机策略

2017年9月17日 · This was caused by a wildcard forwarding IP virtual server and AFM. The solution in the end was to add an AFM rule to the wildcard server for port 3389 with a destination of the SSL-VPN VIP and the IP of any Windows server that an APM remote desktop object had been created for.

The front-panel ports on F5 r2000/r4000 systems support port profile functionality. Port profiles enable you to change which mode, or port speed, that port uses. SFP28 ports operate at 25GbE by default, and SFP+ ports operate at 10GbE by default.

2021年1月26日 · Consider this article when you need to use a custom service port for a health monitor. Environment. BIG-IP LTM; Pools and Monitors; Cause. Certain applications require monitoring services on a different port than application services. Recommended Actions. To accommodate this need you will create a custom health monitor and modify the Alias Port