When tested in accordance with S5, each occupant seat shall withstand the following forces, in newtons, except for: a side-facing seat; a passenger seat on a bus other than a school bus; a passenger seat on a school bus with a GVWR greater than 4,536 kilograms (10,000 pounds); and, a passenger seat on a school bus with a GVWR less than or equal ...

Federal Motor Vehicle Safety Standard (FMVSS) No. 207, "Seating Systems," establishes requirements for seats, their attachment assemblies, and their installation, to minimize the possibility of failure as a result of forces on the seat in a vehicle impact. The standard applies to passenger cars, multipurpose passenger vehicles (MPVs),

本文将对FMVSS 207进行详细解读，以便更好地理解汽车座椅的安全性能和标准。 FMVSS207标准. FMVSS 207的主要内容包括对汽车座椅结构、材料和安装的要求。 首先，该标准规定了汽车座椅必须具有足够的强度和刚度，以在碰撞时有效地吸收和分散能量，从而最大限度地减少乘员受伤的可能性。 此外，座椅的材料必须符合一定的耐磨、耐腐蚀和耐高温的要求，以确保在各种极端条件下都能保持稳定和可靠的性能。 而座椅的安装也必须符合一定的标准，确保座椅在发生碰 …

2013年2月22日 · 内容提示： 1§ 571.207 第 207 号标准座椅系统 s1. 目的和范围。本标准为座椅、座椅附件及其安装提出要求以最大限度地减少因汽车碰撞力导致失效的可能性。 s2. 应用。本标准适用于客车、多用途客车、卡车和公共汽车。

This final test report was prepared for the U.S. Department of Transportation, National Highway Traffic Safety Administration, under Contract DTNH22-01-C-31025. This publication is distributed by the U.S. Department of Transportation, National Highway Traffic Safety Administration in the interest of information exchange.

This Standard applies to MPVs, trucks and buses. It establishes requirements for seats, their attachment assemblies and their installation. It also specifies minimum forces and torques that seats, except jump-type or side-facing seats, must be able to withstand. Applicability: Read the Complete Standard. Copyright © NTEA. All rights reserved.

2024年2月18日 · 本文将对FMVSS 207进行详细解读，以便更好地理解汽车座椅的安全性能和标准。 FMVSS 207的主要内容包括对汽车座椅结构、材料和安装的要求。 首先，该标准规定了汽车座椅必须具有足够的强度和刚度，以在碰撞时有效地吸收和分散能量，从而最大限度地减少乘员受伤的可能性。 此外，座椅的材料必须符合一定的耐磨、耐腐蚀和耐高温的要求，以确保在各种极端条件下都能保持稳定和可靠的性能。 而座椅的安装也必须符合一定的标准，确保座椅在发生碰 …

mvss 207 规定了对座椅、固定装置和组件的要求，以最大限度地减少因车辆碰撞中作用在座椅上的力而导致故障的可能性。 卡车和公共汽车适用于标准乘用车、多功能乘用车、多功能乘用车（MPV）。

§571.207第207号；标准座椅系统. s1.目的和范围。本标准为座椅、座椅附件及其安装提出要求，以最大限度地减少因汽. 车碰撞力导致失效的可能性。 s2.应用。本标准适用于客车、多用途客车、卡车和公共汽车。 s3.定义座椅指的是至少拥有一个指定位置的座位。

Section 571.207 - Standard No. 207; Seating systems. Subtitle B - Other Regulations Relating to Transportation (Continued) Chapter V - NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION