2006年2月15日 · Implementation of a Tape mode is done by the machine builder, not Fanuc. On older machines/controls this was commonly one of the selection on a mode select rotary switch. On the 16/18 series controls it was often not implemented on the mode select switch, but made a softkey or keeprelay.

2016年4月11日 · Basic overview of setting up drip feeding from a CF or USB key on a Fanuc Oi-MC

2015年10月27日 · As far as I know, you can't drip-feed from USB, only RS232 or Memory Card. I believe the newest models allow you to drip feed from the Embedded Ethernet, too.

This video will explain how to run CNC programs in remote mode so that you don't have to upgrade your memory or until you do upgrade....more.

2019年11月3日 · Found the Fanuc Program Transfer Tool manual (B-64344). Looks like you can upload/download through ethernet port to memory card. Then you can use card as program memory or you can drip-feed from card.

2013年6月12日 · Hello, just got a new vmc with Fanuc oi-md control. Can we dripfeed large 3d files thru the ethernet port instead of rs232 port, we use Surfcam dnc - rs232 port on our older mills. Also noticed it has the card slot and also a USB port, wondering if possible to dripfeed from a flash memory stick?

2015年4月10日 · The Fanuc 11M has two "speed limits" when drip-feeding. One limit is the number of bytes per second that you can send through the serial port (baudrate). The other limit is the number of blocks per second that the CNC can process.

Fanuc OM MDI Basics, Drip Feed, and Programming. Getting started with a Fanuc control on a VMC. Basics of operating a cnc control. #fanuc #homecnc #cncmill...

2020年4月10日 · Start by checking the laptop settings and the configure the Micro DNC similarly. On my machines of similar vintage I use: See page 13 of the user manual. Default from the factory is 19200 baud. This needs to match your machine. Everything else looks acceptable. Shake Hand: Software, I'd assume is XON/XOFF.

Drip Feed. Select Auto/DNC mode on the control. Press Cycle Start. Then go to the computer, prepare the program and click 'Send'. As data Begins to flow the machine moves. In EasyDNC set Baud Rate, Parity, DataBits and StopBits as above. Set 'Mode=Auto or Fanuc'