2018年10月2日 · Hello. I have 2 FLSUN QQ Printers, and yesterday i have problems with one. I have from 2,5 months ago and works normally and not every day, maybe 2-3 times a week. - Yesterday I was printing a piece for a few hours. At night I went to dinner and then to the cinema and I left the printer printing as I usually do when they are pieces that last several hours. On the way back, it turns out that ...

All my prints for the past months suffered from stringing. I finally got some time (winter) to play with the printer settings and found out the right balance. Shortcut: 7mm retraction, 90mm/s retraction speed, 60mm/s prime. I've got coasting active (Cura beta feature), Z-hop is off (it doesn't improve anything), travel speed 200m/s, printing speed 60mm/s. I've used the same settings with PLA ...

I want to know what are the best settings for Cura. I am trying to limit "stringing" and accomplish accurate wall thickness. I can tell you that I had to put the Flow Rate at :102% because it was under-extruding. I would be nice to see expert settings come with the machine on a file. I am pretty sure this printer has great potential like a violin …

A remix of the great flying extruder mod for the FLSun QQ-S Pro.Having only used this for 8 continuous hours of printing, my experience is limited however there are some instant observations I can provide:GOOD:Much quieter retractions. Such an annoying sound, gone. Only have to set retractions to 2mm for good results with PETG at 235c.Better extrusion consistency.Flexible filament capability ...

BLTouch Mount for FLSun QQ Delta printer. You will need 3 M3x10 screws to assemble and 2 screws from the BLTouch kit (or 2 M3x5) to mount.Run a M3 tap through the holes in the top plate and the two holes in the bottom piece. If you dont have a tap slowly work the M3 screws in and out of the parts to cut the threads.To mount to the effector unscrew the single M3 screw from the bottom under the ...

Two leveling flower for FLsun QQ-s Pro and QQ-s 25 cm in diameter. A single line version only using approximately 42 cm of filament.and take only 3-4 minutes to accomplishand aA double line version only using approximately 82 cm of filament.and take only 6-7 minutes to accomplishI hope you enjoy my work. and if you have some spare, feel free to donate to support my work :)

2020年4月1日 · I have an FLSUN QQ-S that i can't get the bed leveling to work correctly. I don't have a bed leveling sensor, so i am leveling it manually. I go through the bed leveling process ,and after finishing and printing the head will be touching on the back side of the bed, but will be high on the front side.Manually moving the head from front to back with the move button the head will rise from back ...

Hey everyone! Just a quick question, any help would be greatly appreciated. I've had some issues with getting a good first layer sticking to the bed, it will usually start printing the outline then end up dragging it behind it or something as it goes. I've done multiple bed levels with the auto leveling feature as well as made manual adjustments to the level through the settings. Nothing has ...

Hello, I own two Q5 that I use to print my self extruded ABS after putting them into old cool and freeze combos as encasings. One of them would be just big enough for a qq and a bid more printing area may not hurt. I have seen no comparison review of the different models or any site that decribes them alongside with features and changes. So I …

Enclose for the QQ-S/QQ- ProYou will need:Acetate 50x70cm 0.7mm thick - 3 sheetsExact sizes of the sheets:Large sides (x2): 677mm x 264mmDoor top: 337 x 264mmDoor bottom: 332 x 264mmPrinted parts:4x door side - hinge side (I joined all 4 together in a print with small linkages for stability)4x door side - non-hinge side (I joined all 4 together in a …