2011年3月7日 · We farm with a 9700. It was an upgrade in size for us in 2008 from a Ford TW 10 (we are just a small farm). I personally like the Fords and feel that they are a well built tractor from that time. Compared to a JD 4440, a 9700 would be similar in size. We use it …

2017年9月25日 · Agree with albertabuck .The surface the seal runs on has to be good as otherwise it will destroy the seal lips. Run Ford 5000,7710&8600 which have been pretty good pto wise. Can't remember if our 8600 has a transmission breather,will have to check . If a transmission/gearbox breather is blocked oil will be pushed out where oil shouldn't be ...

2013年7月20日 · my Ford 7000 slides downhill pulling a 6 row JD 7000 planter. I have had good luck with Genesis tractors, but I want to go newer and bigger frame. Am I in a heap of trouble looking at them? Should I go with T8000 series instead? What were the biggest points of trouble? I can do valve adjustments. I do them on my old Ford 9700 every 400 hours.

2008年8月19日 · I agree with ibewwireman. I think they are cheaper to run and own. We own a 5000, TW 10 and a 9700. We've had the 5000 and TW 10 since new and just bought the 9700 this spring. One thing I've noticed between the TW 10 and the 9700 besides the increase in power is that the turbocharged engine on the 9700 runs a lot smoother and quiter.

2008年10月31日 · 1984 7710 ford tractor The remote hydraulics dont work at all. The 3 point lift will go up and down with no load and only oil pressure i get at the remote is 150 lbs. Already replaced priority valve, combiner valve, and spool. New pump installed. I need to know if the pump works the pto and whatever else is in the housing. I believe there is a ...

2009年7月26日 · Dealer didn't know much about them as none have ever been imported, but I suspect the 30 footer would to expensive for me. I would also need to upgrade horsepower. Current program is completed with NH 8240 115hp (seeder) and Ford 7700 105hp (spray rig). The few hundred acres of primary tillage if required is handled gently by my Ford 9700.

2010年1月31日 · Re: Versatile 160, 256, 276 & ford 9030 bi-directi Pulled 70ft diamond harrow bar with a 94 9030 for several years seeding about 3000acres a year double harrowed everything. Used fuel pretty good ran wide open 2nd gear 6to7mph tank went 7 to 8hours ran fairly warm with the hydrostat drive but both 9030's we used for this are still running as ...

2019年9月11日 · I have a Ford 7700 tractor that was leaking from the steering orbital. I fitted a new shaft seal and brass ring to the input shaft, and a new cylindrical rubber sleeve to the rotor end. One of the o-rings was not supplied and didn't exist in my o-ring kit, but it looked okay and so I re-used the old one with a tiny smear of gasket silicone.

2014年4月22日 · Brakes rite up new shoes and drums in spec last fall .Ok buck here it is #1 80to120 psi at 14/1500 58to60 sec.#2truck off at 120 psi pushon pedal initial drop to110 takes about 60 sec to drop to80 /90 psi no air leaks to be heard.#3 tanks never replaced had truck since new has 111324kmon it used at seeding and little else.#4Drain either tank and both needles drop.#5 Truck is a tandem with box ...

2011年7月23日 · The ol 9600 isnt putting out the preasure it used to, has a hard time lifting the big roller and our heavy disk. I dont have a manual so just curious if any one has done one before. If so how and where is it? Ive replaced pumps before but not on a Ford. If some one has an expanded view of it it would be aprieciated. Thanks JD