2008年6月1日 · So the latest rifle project I have officially kicked off is an HK/CETME/PTR rifle. My end goal for this build is to end up with an HK-G3 rifle, using a combination of CETME, PTR, and HK parts. I am also building off an Ohio Rapid Fire 80% flat. The first step was to …

Overpressure or gun malfunction? These all came from the same box. Brand new build, less than 80 rounds in. Was having cycling issues with subs prior to running these, didn't notice primers coming out until i had a jam found a primer wedged under the bolt.

2009年1月21日 · On this build (G3) I did it with the trunnion out and for the CETME I did it with the trunnion welded in place. I tried it with just the trunnion on the CETME but taking the bolt gap without the receiver was a bit hard, so I opted to weld in the trunnion then press the barrel in.

2018年5月23日 · Assuming you're talking about a kit build, check out InRange TV's CETME build. The CETME process will be almost identical to a G3 since they're only slightly different but MUCH more involved than an AR15 (which is basically like putting legos together). You don't actually need a pre made bending jig but they make it a bit easier.

2020年10月14日 · G3/CETME C Build So I recent bought a receiver for the G3/HK91 platform that I intend to build. While there is no "all-in-one" bundle for an entire G3/HK91 build, there are a bunch of CETME C kits that I can find for pretty much dirt cheap and to my knowledge (I could be wrong), the receiver used for either a G3 or CETME is the same.

2002年9月13日 · So the latest rifle project I have officially kicked off is an HK/CETME/PTR rifle. My end goal for this build is to end up with an HK-G3 rifle, using a combination of CETME, PTR, and HK parts. I am also building off an Ohio Rapid Fire …

2006年1月19日 · How much cheaper is it to build a AK from a Polish AKMS parts kit than to just buy one that all the work has been done to?

2003年1月20日 · After approximately 18 months, I can finally call my Build-a-FAL project finished! Most of that 18 months was entirely due to my own procrastination. I basically did this in installments. First, I ordered the kit from DSA and threw away the awful plastic furniture and refinished the original...

2006年7月13日 · I've fired one and liked it, and have been in the market for a .308 battle rifle. My budget is about $900, but I could go alittle higher if there were...

2020年10月31日 · G3 kits are not rare. They're about 400$ for a kit, over at HKparts. G3 and Cetme barrels are extremely close, except the serrations for the HK flash hider, and the knurl under the triple tree. There are two different flats for Cetmes and G3's. Either flat will build either gun, but the embossings are not the same.