The Gen4 is a generic motor controller intended for use in both highway AND non-highway industrial applications. Not all of the controller features are suitable for an on-highway vehicle.

2018年2月14日 · You should then see a small fuse box on the left with a small removable door. The dome fuse is the 3rd one down on the LHS and rated at 7.5A. The style is a flush fit mini blade fuse although the normal mini blade fuses do fit but the door can't be replaced.

2019年4月10日 · There are 6 relays in it if you have electric reverse. To remove the box, pry up the plastic push pin on the right side. Then slide the box toward you to remove. The wire bundle is long enough to relocate box. I relocated it to alongside the fuse box with two tie wraps. If you have manual reverse, you only have 4 relays located in the fuse box.

Replacement Fuse for Model 7960 Gen4 Power Supply

Possible measures include adding a disconnect switch between the motor and controller on at least 2 out of the 3 phases, or adding fuses in each phase. Contact your local Sevcon …

2016年5月6日 · Based on the owner's manual I had no problem locating the fuse box --- it is located behind OBD port further into the foot well, making it very hard to have a clear view of …

2019年12月16日 · EXAIR’s Gen4 Static Eliminators utilize a new Power Supply to produce static eliminating ions. A new feature of the redesigned Power Supply was the ability to replace a couple of different parts rather than having to purchase an entirely new unit. In a previous video, we showed you how to replace the rocker switch if necessary.

2019年3月21日 · They are in the fuse box which is located under the console behind the coolant tank between the engine and the reverse actuator.

EXAIR's Gen4 selectable voltage Power Supplies are available with two or four outlets and allow you to choose the input voltages of 115 VAC or 230 VAC. The modular cable with electromagnetic shielding protects sensitive electronics against electromagnetic interference while easing connections and routing.

2019年12月16日 · In this video, I’d like to show where the fuse is located on the new Power Supply and how to replace it if blown. If you have any questions about your Gen4 Static Eliminators, or would like to discuss a potential application, give us a call today.