Check the Measuring Value Blocks (MVB) in the Steering Aid Control Module (J500 / #44) for details. The Initialization will usually take place during a test drive. With steering wheel level, wheels pointing straight ahead, make sure G85 is reporting 0 degrees +/- 5 degrees. If a reading of +360 or - 360 degrees is found.

2021年3月19日 · The location of G85 in Mk5 and Mk6 Golf based vehicles depends primarily on the type of 03- ABS and 44-Steering assist systems that are installed. In some cases the installed 16-Steering Wheel Electronics module type in addition to the BCM /09-Central Electronics module is …

2021年10月8日 · Hello! I did the procedure for basic settings on G85. Apparently the error disappeared for G85 but for it didn't work 02546 - Steering Limit Stop. Maybe is because I didn't work yet on solving the wheel speed sensor issue. What worries me is that on Group 004 the value from first field isn't changing when turning the steering wheel.

2016年8月18日 · G85 Steering Angle Sensor locations in Golf-based Mk5 and Mk6 cars This thread is intended to help sort out confusion about the location of G85 (and therefore applicable procedures for crash repairs and module replacements). Specifically in some Mk5/Mk6 based cars, there is a 44-Steering Assist...

Steering angle sensor replacement on a mk5 golf gti similar process for many other models including audi seat and skoda.Recalibration would be necessary in m...

2015年8月10日 · I went to 44 Steering Assist, Adaptation, but it couldn't read G85, it said Error group 090 Not Available. I went several times on Measuring Blocks on ABS Brakes, and only 2 of 6 times it was reading the real time steering wheel angle, the other 4 …

2009年8月14日 · Turn the steering wheel one turn to the right and one turn to the left. Drive in a short distance straight line on a level surface at a speed not higher than 20 km/h. Ensure that the steering wheel is not moved again. Keep the engine running and …

It is strongly recommended to complete the Sensor for Steering Angle (G85) Basic Setting operation immediately after coding the control module. VCDS will provide this Information specific to the Control Module once you open the Security …

Check all Adaptation values in the #44-Steering Assist controller. Verify all of the WSS (Wheel Speed Sensor) values are plausible in the 03-ABS controller! We received feedback from both Mk70 equipped and MK60 ESP equipped (1K) Golf models with 02546 and 00778 DTCs that would not clear due to a faulty WSS.

2017年2月12日 · The error regarding Steering incorrectly coded was a red herring (and is still happening intermittently). Cause On the mk5 golf with MK60 ABS, the G85 basic settings are done via module 03 - ABS (not 44 - Steering Assist). G85 will not accept basic settings if there are faults present in the ABS module.