The JTAG-HS1 programming cable is a high-speed programming solution for Xilinx® FPGAs. It is fully compatible will all Xilinx tools, and can be seamlessly driven from iMPACT™, ChipScope™, and EDK.

The JTAG-HS1 programming cable is a high-speed programming solution for Xilinx FPGAs. It is compatible with all Xilinx tools, including iMPACT, Chipscope, and EDK. The HS1 attaches to target boards using Digilent’s 6-pin, 100-mil spaced programming header, or Xilinx’s 2x7, 2mm connector (using the included adaptor).

The HS1 is designed to drive JTAG/SPI signals on target boards that have less than 100ohms of series resistance. Higher resistance may result in degraded operation.

Small, complete, all-in-one JTAG programming solution for Xilinx FPGAs; High-Speed USB2 port can drive JTAG/SPI bus at up to 30Mbit/sec; Compatible with all Xilinx tools; Fully supported by the Adept SDK, allowing custom JTAG/SPI applications to be created; Separate Vref drives JTAG/SPI signal voltages; Vref can be any voltage between 1.8V and 5V.

2020年8月5日 · 它是Xilinx公司推出的一款JTAG（Joint Test Action Group）接口周边设备，用于连接计算机和Xilinx FPGA（Field-Programmable Gate Array）芯片。 JTAG HS2提供了高速的数据传输和稳定的信号连接，使得用户可以快速而可靠地完成FPGA芯片的编程和调试工作。

2014年12月4日 · JTAG-HS2 is a updated version for JTAG-HS1. We also recommend to buy JTAG-HS2 because this is newer than JTAG-HS1. The following features are not supported by the Digilent Cables:

View datasheets for JTAG HS1 Reference Manual by Digilent, Inc. and other related components here.

2014年11月25日 · JTAG-HS2 is a updated version for JTAG-HS1. We also recommend to buy JTAG-HS2 because this is newer than JTAG-HS1. The difference is that those contains other main chip. The following features are not supported by the Digilent Cables: • Xilinx 9500/9500XL CPLD programming or configuration

Digilent's JTAG-HS1 is a programming cable for xilinx fpgas. in the programmers, in-circuit programmers, emulators and debuggers category. Check part details, parametric & specs updated 10-JAN-2024 and download pdf datasheet from datasheets.com, a global distributor of electronics components.

2023年9月25日 · I have an JTAG-HS1 that I haven't used in a while but want to use to debug in Vivado. When I plug the device into my Windows 11 machine, it is recognized as two devices: "USB Serial Converter A" and "USB Serial Converter B", but these aren't programming devices and Vivado can't talk to the HS1.