別所二郎、別所太郎のノコギリは弊社のブランド。 三木金物の手作りの鋸。

Hishika Japanese saws are individually handmade in the finest traditions of the Japanese sawmaking craft. The sawsmiths forge and scrape the blades by hand, using techniques that would have been familiar to smiths of the Meiji era (1868-1912).

Hishika Dozuki. These traditional saws with backs produce the finest imaginable cuts and finishes. If you’re looking for a saw that simply will not let you down, this is the saw for you. The companion piece for the Dozuki crosscut saw is a Dozuki rip saw that is ideal for cutting perfect finger joints, dovetails and tenons.

Our Hishika Dozuki Saw is made from fine quality high carbon steel. The teeth are well cut with minimal set to ensure the smoothest cutting action in small work. The blade thickness is 0.009" and the kerf is 0.010". Blade length 4¾˝; overall length 12¾˝ with 32 teeth per inch. Features: • Blade length 4¾˝; overall length 12¾˝ with 32 teeth per inch

Another great quality saw by Hishika! Handmade and fully hardened, this saw is not suitable for beginners as, unlike cheaper disposable saws, it won’t bend and kink if misused, but snap! These are part of the Proonly range, saws with a type of tooth which allows the user to cut in any direction of wood grain.

Blade Length: 9.5 inches of Japanese-made HISHIKA-branded precision allows for effortless pruning of garden trees, such as grapes and kiwis, all contained within a wooden storage case. Important note: This saw is prone to cracking if mishandled and is most efficient when pulled instead of pushed.

ヒシカ工業では、職人の手で昔ながらに「手焼き入れ・焼き戻し」「歪み取り」「研磨加工」を経てノコギリ製造をしております。 「目立て」をする事で繰り返し長くご愛用頂けます。 *切りやんだノコギリの目立ても賜ります。 お気軽にお問い合わせ下さい。 材木を切る一般的なノコギリから、本職用のノコギリまで。 made in JAPAN 鋸の王道「両刃ノコギリ」はもちろん、「縦挽き」「横挽き」の「片刃ノコギリ」。 また、木目を選ばない「改良刃」など木工作業 …

Hishika Flush Cut Saws, sometimes referred to as wooden nail saws, are used for flushing wooden nails and plugs with the surface of your work. The thin, flexible blade lets you raise the handle for clearance while keeping the cutting edge flat to …

Our handmade Japanese saws are made by Hishika in Miki city and have been produced using traditional techniques but with western woodworkers in mind, the teeth are shaped and hardened to suit the tasks of cutting furniture sized dovetails and tenons in European hardwoods.

Hishika Handmade Japanese Flush Cutting Saw 180mm. Light & highly flexible, unset teeth for trimming dowels. Buy professional Japanese saws at Workshop Heaven.