This will work on all makes and models that require removing a stub (intermediate) shaft. I'll show you how to take an existing tool and modify it slightly t...

REMOVAL (1) Remove axle driveshaft from vehicle. (2) Remove outer C/V joint. (3) Remove outer C/V joint small clamp and remove boot (Fig. 7). (4) Remove inner C/V joint boot clamps and remove boot. INSTALLATION. The lubricant amounts included with replacement boots are different for inner and outer C/V joints.

2007年2月8日 · I spent 45 minutes under my Durango tonight trying to pull my front driveshaft off so I can overhaul the thing (new centering ball in the CV unit, new u-joints all around). I pulled the 4 big bolts that appear to hold the circular plate on the differential-side yoke to the circular plate on the differential, and the four small bolts that hold ...

2022年11月5日 · This video demonstrates how to replace the CV axle drive shaft on a Dodge Durango.

(2) Remove the necessary C/V driveshaft from vehicle. (3) Remove the skid plate, if equipped. (4) Clean all foreign material from axle seal area. (5) Install Puller Adapter 8420 onto the axle shaft. (6) Install Slide Hammer C-3752 to the puller adapter. (7) Remove axle shaft. Use care to prevent damage to axle shaft bearing and seal, which will ...

(1) Remove the axle shaft. (2) Remove the axle shaft seal from the end of the axle shaft tube with a small pry bar. NOTE : The seal and bearing can be removed at the same time with the bearing removal tool.

2010年11月1日 · I order a halfshaft and the stub shaft from Dodge, and pick them up this morning. Replaced them both today (driver's side front) to find that: the outer groove on the stubshaft is in the wrong spot!

2009年4月6日 · Remove the C/V driveshafts from the axle shaft flanges. I don't recall the size of the bolts, break the bolts loose with a breaker bar and then they come right off. No problems. Although you will have to apply full brake, loosen two bolts, release brake and turn axle to reach two more bolts, and repeat.

2017年3月5日 · Remove skid plate if equipped. #3. Mark a reference line across the propeller shaft and pinion flange. #4. Remove exhaust crossover bolts from exhaust manifolds, and lower crossover. #5. Remove boot clamp from the CV joint. #6. Remove pinion flange bolts. #7. Side propeller shaft off of the transfer case, and remove shaft.

Before this happens, you can remove the axle shaft and CV joint from the Durango to perform your own maintenance. Put the Durango on jack stands with the jack, then take off the wheels using a tire iron. Unbolt the front skid plate from underneath the Durango with the …