new iLO MP network name. This is the host name for the iLO MP LAN displayed at the command prompt. It is also used to identify the iLO MP LAN interface in a DNS database. The name can be up to 64 characters in length, and must start with a letter, end with a letter or number, and contain only letters, numbers, or dashes.

Single iLO device RBSU is the recommended method to set up a single iLO device initially. After the iLO device has been set up, it should be available on the network; and subsequent configuration and management can be done through the web browser or a script. RBSU is available every time the server is booted and may be run remotely using the iLO

is the IP address that is mapped to the MAC address of the iLO MP. The iLO MP LAN port should now be configured with the appropriate IP address. Step 5. Use the telnet command to connect to the iLO MP from a host on the local subnet. Accessing the iLO MP You can connect to the iLO MP using the following methods:

由于集成的iLO 是一个简板的设备，很多的功能不能实现，需要另行购买选件号是 263825-B21 的产品，叫做 Integrated Lights-Out Advanced Pack. 在客户端使用IE浏览器在地址栏输入设定的IP地址，在前面要加Https:// 即可登陆需要

HP BladeSystem Onboard Administrator Command Line Interface User Guide Abstract This guide details using the command-line interface for configuration, operation, and management of the HP BladeSystem Onboard Administrator

remote sessions. All service port traffic is routed through the iLO/MGMT port, located on the iLO CM module: The switch service port interface is enabled by default and can be used with the switch serial console port when making configuration changes. The switch serial console port is on the uplink module. To identify the switch serial console ...

€ € 16. iLO 3 NIC connector € € 17. NIC 3 connector € € 18. NIC 4 connector What's New Support for new HP hard drives, UPS QuickSpecs HP ProLiant DL380 Generation 7 (G7) Overview DA - 13595€€€Worldwide — Version 65 — March 25, 2013 Page€ 1

Tables 7 Table 1. Publishing History Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2010年9月16日 · I have this old server that I am trying to configure the ILO port on. I interupt the boot by pressing F8 to config ILO. There I have 2 options: EXIT or FACTORY DEFAULTS. I select FACTORY DEFAULTS. Next I have two choices; one to set FACTORY DEFAULTS (F10) and the other to exit. I select FACTORY DEFAULTS, it indicates ILO has been reset.

the network switches and connects to the iLO port on each server. The iLO port is used to shut down nodes in the case of malfunction. There is no shared storage between couplets. Each node has separate dual 8Gb fibre channel connections, dual 10GbE ports and dual 1GbE ports for connection to the customer’s SAN and network infrastructure.