Jun 6, 2021 · Great video but you just forgot to mention some of the most important settings of the IC-7300 for properly operating digital modes. 1. The filter settings of the IC-7300: Normally you have to set the radio to the broadest RX filter to receive as much as possible because everything else is controlled by the digimode programme.

Mar 27, 2021 · Hi @zoofer, I owned a IC-7300 for couple years, traded up to an IC-7610. I used my 7300 to hunt for low band beacons (NDB, etc.), with great success. The low noise receiver, coupled with the excellent display helps you find weak signals that would otherwise be missed.

Apr 13, 2018 · The IC-7300 can talk around the world or it can struggle to talk to the guy in the next county. It depends on many other factors as I explained in your other thread. I have an IC-7300 and use it with a fan dipole for 80m, 40m, and 20m and vertical for 20m, 15m, and 10m.

Dec 8, 2020 · If you are going to make a video particularly one that is likely to be watched by many of the new ham/new IC 7300 owners maybe your video ought to make it clear that you have complied with FCC regs. You can assume all you want. Watch the video and you will see the TX light on the 7300 come on while he talks and go out when he finished. Never an ID.

Jun 6, 2021 · With firmware version 1.4 loaded on your IC-7300, press MENU, then on the menu screen press the number 2, then press FT8 PRESET, then press 2:FT8 then confirm with YES to load the preset memory. KC8UD , Jun 8, 2021

Aug 5, 2021 · I use Fldigi for BPSK, Olivia, Contestia, DominoEX and several other modes. It was very easy to set up the IC-7300 to operate in D-SSB mode. You can find plenty of information on YouTube about both radios. I viewed WA2IVD Ham Cured Smoke IC-7300 A-Z videos and they were a great help for understanding this radio. It is a great level entry radio too.

Aug 5, 2021 · I bring my Icom IC-7300 to the top of Mont Hereford, Québec, Canada at 2800 feet elevation (875 meters) to do DX contacts, I will be operating on... Thread by: VE2FGJ , Jul 12, 2020 , 50 replies, in forum: Amateur Radio News

Sep 11, 2022 · ICOM IC-7300 TRANSCEIVER ICOM AH-4 Antenna Tuner LIGHTNING SURGE PROTECTORS (2) ANTENNA WIRE GROUND WIRE GROUNDING RODS (3) JUNCTION BOX COAX COAX CONNECTORS COAX COMMON MODE NOISE FILTER ROOF CABLE CLIPS Various other connectors, chokes, sealant, accessories etc. I've reset the IC-7300 back to …

Feb 13, 2020 · The '7300 won't even remember it's Carrier Power setting from the last band change. Curiously, there are 2 separate controls for Noise Blanker, and yet lacks front panel MODE switching button.

Sep 24, 2020 · No I only have one problem left: I don't have an IC-7300 yet and am still figuring out if swapping my FTdx-3000 for an IC-7300 will be a good move or if I'm going to regret it. The waterfall on the Yaesu is just pathetic compared to the one on the Icom.