2019年3月20日 · Hi people I have an Isacon Power Control Tech A2 VFD running a 2.2kw 400hz water cooled spindle, I am thinking the VFD is a rebadged AskPower but not sure, I ran it a few times short spurts no load as I don't want to run it without …

2019年3月22日 · Our hardware: - DB25-1205 BOB - Isacon A2-8015M VFD (1.5kW) - 1,5 kW spindle "JGF-FC65C-1" - UC100-USB controller for Mach3 - 32bit W7 PC with Mach3 - Picture of VFD control ports - Picture of BOB ports - Pictures of VFD settings The idea was that Mach3 could control spindle's power (on/off), its rotation direction (clockwise/anticlockwise) and ...

2020年6月25日 · Hi people I have an Isacon Power Control Tech A2 VFD running a 2.2kw 400hz water cooled spindle, I am thinking the VFD is a rebadged AskPower but not sure, I ran it a few times short spurts no load as I don't want to run it without the right settings.

2019年3月21日 · So now we have a working setup but it would be way easier if the spindle could be controlled via Mach3 instead of VFD box. The problem is that we found no manual for this neither the provided guide mentioned anything like it. Our hardware: - DB25-1205 BOB - Isacon A2-8015M VFD (1.5kW) - 1,5 kW spindle "JGF-FC65C-1" - UC100-USB controller for Mach3

2018年3月27日 · I'm getting ready to purchase a couple more VFDs (They will, more than likely be the LAPOND SVD-ES Single Phase VFD Drive VFD Inverter Professional Variable Frequency Drive 2.2KW 3HP 220V 10A for Spindle Motor Speed Control (VFD-2.2KW)) for other machines I'm building but, yet again, I want to mount the control pads remotely from the unit ...

2020年4月16日 · Connecting Isacon A2 VFD to Mach3 through DB25-1025 BOB. By idevenk in forum Spindles / VFD Replies: 5 ...

2017年3月28日 · I have an Isacon Power Control Tech HY series 2.2kw inverter (thought I was getting a true HY inverter but was wrong). I want to control the vfd from mach3 with my g540 controller. I have read all the links on how to setup the HY vfd but mine is a bit different - instead of the external controls being set through pd001 mine is pn004.

2018年5月22日 · I'm getting ready to purchase a couple more VFDs (They will, more than likely be the LAPOND SVD-ES Single Phase VFD Drive VFD Inverter Professional Variable Frequency Drive 2.2KW 3HP 220V 10A for Spindle Motor Speed Control (VFD-2.2KW)) for other machines I'm building but, yet again, I want to mount the control pads remotely from the unit ...

2019年6月20日 · Hello, i bought Isacon Power Control Tech A2 series VFD and new spindle ( parameters of both items can see in attachment). Connected VFD to single-phase 220v and three wires of the motor to U, V, W. Everything seems to work fine but the problem is that spindle heats up very fast (cant touch with hands).

2020年12月9日 · The model number of the vfd is A2-8022 and it is made by Isacon Power Control Tech. I have 7 port on the spindle, 3 (RST), there is a green sign in the middle that I think maybe the earth, and there is UVW on the right side. In the manual it is written that for one phase 220 V I should connect R and T as it is seen in the picture.