Snapmaker J1s features independent dual extruder (IDEX), ultra-fast print speed, and innovative IDEX calibration. With cast and machined parts, linear rails, user-friendly IDEX 3D slicer and Touchscreen, J1s is your next go-to desktop IDEX 3D printer.

Snapmaker J1是深圳快造科技（Snapmaker）推出的全新高速IDEX 3D打印机，是继三合一3D打印机之后的最新产品。 它为用户带来了双打印头的加倍乐趣，让你能够体验到更高效的打印体验。 Snapmaker以其精湛的三合一机器而闻名，而现在，他们推出了Snapmaker J1机器，其与众不同之处在于它配备了两个独立的打印头，使得打印效率翻倍提升。 此外，J1还支持使用两种不同的材料，最高打印速度可达350mm/s，具备简单易用的校准功能。 以下是资源库对这台机器的完 …

The glass build plate of J1/J1s is double-sided, one being glass and the other PEI-coated, which can meet most daily demands of printing with different filaments. In general, we recommend printing on the PEI-coated side for its low-maintenance adhesion …

为了使你更快熟悉机器与 Luban 的作业工作流，并顺利和 J1/J1s 一同完成首件 3D 打印作品，本章节将指引你跟随 Luban 的新手引导程序，使用标配的耗材，制作我们为你的首次体验而量身打造的内置案例。

Find Air Jordan 1 Shoes at Nike.com.

Check if your PEI glass plate is flat since J1/J1s heavily relies on that. When installing filaments, it is recommended to follow the steps below: (1) Pull out the Teflon tube on the top of toolhead. (2) Insert the filament through the Teflon tube from the back. (3) Insert the filament into the toolhead. (4) Install the Teflon tube. ¶ Start ...

2023年11月9日 · They rely on a very flat (thick glass with PEI) print bed to mitigate flatness instead of a mesh, also because IDEX. For the most part adhesion is said to be very good. The Marlin open source firmware is released, but not their Android layer.

2024年9月19日 · For me $50 for a years use is cheap. You can use the other, flat side of the plate coated with capton foil. It gives an excellent adhesion and can be renewed as often as it is necessary. Hi FlashErase,

2022年3月20日 · 1’s are comfy depending on how tall you are imo. They’re nothing like Adidas boost, feel pretty flat but decent once broken in. I’d wear them for 5-6 hours at a time, that’s about it. Casual wear. I find J1s comfortable as soon as its ‘broken in’ - …

2024年10月7日 · Such a massive delamination can only be caused by a production issue. Alternatively you can use the other, flat side of the plate coated with capton foil. It gives an excellent adhesion and can be renewed as often as it is necessary. I bought the printer from microcenter as is, so I don’t think I can make any warranty claims.