Model 2350 I have a couple questions about the following horn that I have just picked up for $ 100.00 for the pair. I am just now getting into a small project and would like to know the correct way to test these.

2016年11月20日 · I dont mind adding a Jbl 2404/2405 as i Can find Those at a good price. 2445 and 2441 are the large Jbl comp drivers i see on the marked from time to time. Hope to find a 2441 at a good price with some patience. about the 2350, i know its kind of ridicoules reason, but i Think it would look awesome on top of 2 2225's thats side by side.

Gents, Newbie to this wonderful site, newbie to JBL as well, though have been in audio for a little more than 10 years, don't know jack when it comes to jbl. Would appreciate the inputs: 1. 4425 or L65 for monitors?

JBL 2350 (available to me in Australia for US$200+) 2. JBL 2385 Copy (actually not quite a copy- it is some 10-20% larger, but has similar dispersion pattern) (already have these) 3. Altec 2x5 Multicell + mods to fit 2440.( I could get these for US$150 or swap for two 2401 tweeters- without diaphragms) and then try to make or mod the throat/adapter

2011年5月3日 · Concerning the dimensions of the mentioned 2350 Horn, especially keeping in mind the problem about "time delay" differences between mentioned drivers and lower frequency (bass or/end mid-bass) and high frequency (UHF driver) and keeping in mind that you will use 'in-home" environment, I suggest you to think about 2308 Lens + 2311 Horn, and with ...

2011年5月3日 · Because if the driver has "something" happening at 300Hz, it means I will be fully operational at 500Hz with a 2350 at 12db cut-off. Along those lines, I have found that "derating" horns is the easiest way to improving their sound... say using an Altec 511 as an 800Hz horn instead of it's rated 500Hz, an 811 as a 1200Hz horn etc...

2020年12月23日 · Nice if you need pattern control in the horizontal plane at 500hz. Pretty good knock off of a JBL 2350 but not something I'd want to be listening from any closer than 50ft . What is the appeal these days of lumping old, crude technology in with old, still good tech? Altec sectoral horns in living room stereos for instance.

I have only experience with the Radian 1245-16 diaphragms mounted into the 2441 JBL drivers. I can say that up to the 10kHz they are very good. I have used them with JBL 2307+2308 horn-lenses combo, in my DIY 4333 speakers You can seen measurements results, Pay attention that on my measurements the vertical resolution is 2.5dB regards Ivica

I cannot satisfy with original horn of 4350 so I move to external horn JBL 2350, but still use origin crossover. Sound stage so good and very detail now. Very large! Thanks for your all ideas! Regards,

2009年8月4日 · I currently have the following components on hand: 1 - pair of JBL 2395 (horns+lens+stands) 1 - pair of JBL 2350 (with 2" throat adapter) 2 - pairs of JBL 2441 (one pair with titanium and the other with aluminum) 1 - pair of NIB JBL 2404H baby cheek tweeters Any suggestions on which way I should go.