Plan to strap an awesome LSA blower on top of your LS engine? ICT Billet makes a LSA supercharger swap kit that will integrate the blower into a 6rib serpentine system. This kit is designed for truck spacing, only way to make it work with how far the pulley sticks out.

2014年2月11日 · Since the introduction of the LS9 and LSA platforms, we have been researching and testing every possible combination to maximize performance. Standard upgrades, such as camshafts, cylinder heads, pulleys, headers, etc. all show great gains across the power band, and prove how responsive these factory supercharged engines are to modification.

2020年8月31日 · Running a 236/254 119 LSA and a Sniper 102mm TB. It’s hard to: - Get a good stable idle that will cold start with no issue. - Get the throttle to open ALL the way when the throttle linkage and pedal is adjusted. Let me l know your thoughts. This is with the Terminator X Max. I do have the harness and LS3 TB and Pedal. Location: Wilton, CA.

2023年8月26日 · Hello everyone, I recently purchased a LS6 from a 2003 Corvette. The engine came with the ECM but no harness. It is DBW and I am going to convert it to DBC. I purchased a OEM DBC throttle body from a 2002 Camaro. I understand that I will have to get the ECM programmed to reflect that is now DBC. I was told that most likely the ECM will go both ...

2022年12月22日 · I've used both on my LS swaps. Both worked well. I used a Lokar pedal on DBC and used the DBW pedal supplied with the aftermarket harness along with the matching ECM.

Get your LSA swap up and running with our plug-and-play standalone harness. While other big-box manufacturers throw you a universal harness and say "make it work", we've put together a specifically tailored, highly inclusive wiring system for the increasingly popular LSA superchargers.

2023年5月14日 · Different generations of LS based engines came with different styles of throttle bodies. DBW (drive by wire) and DBC (drive by cable). Both work very well. Some Gen 3 (24X) swap applications work better with a DBC in my opinion but others I prefer DBW. All Gen 4 (58X) applications are DBW unless you use a non OE PCM li

If converting from DBW to DBC on a RED/BLUE harness, you only have to add the wiring for the IAC valve and TPS. Use this schematic for pin information. If you have a RED/BLUE connector PCM, you CAN use this pcm on a 03+ harness (GREEN/BLUE connector) with cable throttle, with a few simple modifications.

2017年12月31日 · I have a G3 Hemi, DBW, wiring harness. I'm changing to a DBC 4 Barrel Throttle Body with a 5.0 Ford TPS. What do I need to connect the DBC TPS to the ECU? Thanks.

2015年4月24日 · Found my own answer. If anyone else needs to know. 2007 and prior truck and SUV motors still use *24 reluctor. So only thing needed to swap from dbw to DBC is the cable tb and the actual cable. Harness is stand alone so order it …