
LT1210 Datasheet and Product Info | Analog Devices
2015年11月9日 · The LT1210 is a current feedback amplifier with high output current and excellent large-signal characteristics. The combination of high slew rate, 1.1A output drive and ±15V operation enables the device to deliver significant power at …
LT1210数据手册和产品信息 | Analog Devices
LT1210 是一款电流反馈放大器,其具有高输出电流和卓越的大信号特性。 高摆率、1.1A 输出驱动和 ±15V 工作电压之组合使得该器件能在位于 1MHz 至 2MHz 范围内的频率上提供大量的功率。 短路保护和热停机功能确保了器件的坚固性。 LT1210 可在采用大的容性负载时保持稳定,并能轻松提供容性负载所需要的大电流。 停机功能可将器件切换至一种高阻抗和低电源电流模式,从而降低了器件处于未使用状态时的功率耗散。 对于较低带宽应用,可利用单个外部电阻器来减小 …
The LT®1210 is a current feedback amplifier with high output current and excellent large-signal characteristics. The combination of high slew rate, 1.1A output drive and ±15V operation enables the device to deliver signifi-cant power at frequencies in the 1MHz to 2MHz range.
Does anyone have experiences with the LT1210? - diyAudio
2005年11月8日 · As the specs look very good, I thought about using 2 LT1210 per channel. They have better specs than the commonly used National chips, and two should give 16W at 4 Ohms. The LT1210 is a 1,1A 35MHz current-feedback 7-pin TO-220 op-amp from Linear Technology. Did anyone already use it?
A composite with LT1210 - another way of doing it - diyAudio
I had an idea of improving results of my ultra-cheap amp with paralleled NE5532 and a nested feedback. Accidentally I found a bag with LT1210 samples in my drawer. There was not much time spent thinking after that. I pulled out output section from the prototype board (NE5532 x 5) and fitted an LT1210 instead.
Please check my chipamp with 2 x LT1210 - diyAudio
2006年11月19日 · I have four LT1210, and from the datasheet it looks ok for a (low power) chipamp. To feed 4ohms, it looks like I'd better parallel two of them. As from the datasheet (and my spice simulation) it looks that a gain of 2 would be a good choice, so I'll put an op-amp in front.
LT1210IR#PBF Analog Devices Inc. - LT1210IR#PBF | DigiKey Electronics
Order today, ships today. LT1210IR#PBF – Current Feedback Amplifier 1 Circuit DDPAK-7 from Analog Devices Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
The LT1210 is available in the TO-220 and DD packages for operation with supplies up to ±15V. For ±5V applications the device is also available in a low thermal resistance SO-16 package. Twisted Pair Driver L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective ...
Analog Devices | LT1210CR - 数据手册PDF和技术规格
2024年11月6日 · Analog Devices's LT1210CR is an op amp single low noise amplifier ±15v 8-pin (7+tab) ddpak. in the amplifiers, operational amplifiers - op amps category. Check part details, parametric & specs updated 21-AUG-2024 and download pdf datasheet from datasheets.com, a global distributor of electronics components.
suitable transformer for LT1210 amplifier - Q&A - Operational ...
2023年8月1日 · The LT1210 is a current feedback amplifier with high output current and excellent large-signal characteristics. The combination of high slew rate, 1.1A... Datasheet