2018年3月6日 · If a MC2 E90 performs like a K10 there's something wrong in what they declare on 9dB CF ratings Anyway, one other important question is: somebody told me that there is the possibility to change the speed of action of the limiter with pin switch inside the amp.

2011年2月16日 · ok, so output of E90, measured the MC2 way is 16k for whatever length of time. So the Matrix 10K, measured the same way would be 26k, then ? or 26k divided by 10 is 2.6, so 16 divided by 2.6 is 6.15k output ?

2012年1月20日 · The Lab Gruppen has slightly higher peak output voltage than the MC2 (on paper). The most impressive aspect is that it sounds as fast and tight running 2r as it does 8r. Apparently this an advantage of Class D but I'm not sure if …

2010年8月26日 · Old Croc Joined: 13 May 2010 Location: Guildford Status: Offline Points: 2377 Post Options

2013年8月8日 · heard mc2 E90 running 4 21'' horn subs per channel.8kw in 2ohms is just a joke.it was clipping like hell while the other ram amps were still green and still pushing the subs.the guy who brought it for testing was totally disappointed..

2007年9月17日 · Actually, just remembered being at a soundclash, where one system had E90 driving 8x 1850s, and other crew had PL9 driving the same. Result inevitable. E90 system sounding real smooth, refined, warm, but clip/limit lights signaling headroom all gone. PL9 set not as refined or warm, but SPL smashing venue down, brick by brick.

2010年3月22日 · The E90 is a mighty beast and into 2 ohms will draw a lot of current. The actual draw will depend upon the type of signal but we give average figures for fairly heavy club music which are adequate for most purposes. This is the 30A rating into 4 ohms. Into 2 ohms the average rating would be twice that but there are internal limiters to prevent

2012年4月1日 · I'm useing 2 MC2 E90 amps, and when pushing the amps to 75% of its capability or more it verry fast starts running verry hot and looses output power. and i'm only experiencing this kind of trouble with the MC2 E90 amps. the other amps i have in use won't get this hot and/or looses it's power when pushing the amp's to the max.

2023年11月27日 · MC2 claim to measure the power using burst tones with crest factors as low as 2.8, but don’t specify the burst length, or what the load was. The spec sheet also states that the nominal current draw with a 4 ohm load is only 5.6A (240V), which seems a …

2010年8月24日 · MC2 E90: Post Reply : Page 1 2 3 15 > Author: Message Topic Search Topic Options. Post Reply. Create New ...