Rated voltage: 230V ~ (1P), 400V~ (2P, 3P, 4P); Frequency: 50/60Hz Thermal magnetic release: B curve (3-5In), C curve (5-10In), D curve(10-14In), OV curve (14-20In, the OV curve is only available in 3P 80A);

2022年3月26日 · 30mA RCBO MCB 230V 50/60 Hz Residual Current Circuit Breaker with Over Current and Leakage Protection 6/10/16/20/25/32/40A (Color : 1P N, Size : 6A)

This Easy9 product is a low voltage miniature circuit breaker (MCB). It is a 1P circuit breaker with 1 protected pole and 16A In rated current and C tripping curve. The rated short circuit breaking …

Voltage Rating: Specifies the maximum voltage the MCB can safely handle. Typically 230V or 400V for domestic use. Choosing the right MCB involves considering the specific requirements of the circuit, including the type of load, expected current, and potential for inrush currents.

This Multi9 C60BP is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 30A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard.

Honeywell Metalclad Circuit Protection, Minature Circuit Breakers (MCB's) are a range of products designed to be used with Honeywell's Metalclad Circuit Protection range of Consumer Units. Products are availble in both Type B and Type C variants with …

Once a fault is detected, the MCB automatically switches off the electrical circuit to prevent damage to wires and to avoid the risk of fire. MCBs are equipped with two tripping mechanisms: the delayed thermal tripping mechanism for overload protection and the magnetic tripping mechanism for short circuit protection.

Meba b type breaker MBB8-63 MCB is mainly used in AC50/60HZ single-pole 230V or two, three, four-pole 400V circuit for overload and short-circuit protection as well as for unfrequent on-and-off switching electric equipment and lighting circuit under normal condition.

High Selectivity between MCB and backup fuses; Compatible with Standard Busbar; Bus bar positioning – optionally above or below; Secure isolation as the distance between contact > 4mm; Suitable for 48Vdc applications