The source for discussions on mudmotor, mudmotors, mudboats, Gator-Tail, Prodrive, Mud Buddy, Go Devil, duck hunting, fishing, bow fishing and more! MMT Affilliate Sites Check out these forums owned by the people that brought you MudmotorTalk.com!

2010年5月24日 · I am looking at purchasing a Mud motor for use in Alaska. Looking for feedback from folks on what they have, how it has worked, and what they would have done differently with the purchase. Pro Drive, Mud Buddy, Beavertail etc.....I will be living in the Anchorage area and use of engine would be mainly shallow rivers/streams with silt and gravel.

2010年3月23日 · If you are running rocky rivers, get a jet. If you are running mud, brush, and vegetation, get a mud motor. I often run my mud motor in rocky rivers to get to the large marshes I hunt, they DO NOT run nearly as well or as shallow as a jet boat on a tunnel boat. But... if you try to take that jet engine in mud or weeds, you are dead in the water.

2016年7月2日 · Re: Homemade 13HP longtail (mad mud motor plans) Thanks for the replies guys, I plan on using weld in nuts and 1/4 20 bolts with fender washers same as I did for the cavitation plate, I have it so it hooks on one side and bolts on the other but I think I'm going to make it bolt on both sides if anything for ease of removal.

2010年12月7日 · a friend of mine has a 10hp copperhead it runs good but looking at it this weekend its built very cheap. it clamps to the boat with round head bolts backwards they rattle lose and there goes the motor if not bolted. besides that the lower shaft is a piece of chit, he hasnt had it for long and already has gone through like 4 seal. instead of having a bearing in front of the prop it has seals ...

2014年3月13日 · The following is my review of the Mud-Skipper Longtail Motor Kit Specs on the rig are as follows: Boat: 1432 Duracraft modified V Motor: 6.5 HP / 212 CC Predator (Harbor Freight) Kit: Mud-Skipper 5-7 HP longtail motor drive system Background: I use my rig primarily for duck hunting in marshes and rivers in Kansas and Missouri.

2013年12月11日 · Last visit was: Tue Mar 11, 2025 8:05 am: It is currently Tue Mar 11, 2025 8:05 am

2018年7月27日 · The best analogy I could give you would be the difference between long tube headers and shorties. Shorties give you a gain over stock because of less restriction, but if you want the most out of a performance motor, you will opt for longtubes, because they have longer primaries, hence why performance cars run longtubes.

2012年7月24日 · gtr35 gt 1854 / w gatorglide 12 ft 11hp longtail 14 ft 10 hp longtail Merc 225hp TR20: Tue Jul 24, 2012 4:15 am

2014年11月3日 · Deep water speed was a respectful 18 mph but there was a LOT of vibration at the handle. I expected that as the engine is not mounted to anything but a pin holding it to the transom mount. I didn't buy the engine for running this little lay out boat across the lake. I bought it to get to places that my other mud boat won't go.