Tri-Band Whip Antenna for VHF and UHF radios we sell. Antenna is pre-tuned (i.e. it requires no tuning) and uses an NMO mount (3/4" hole). Black coated stainless steel whip with a spring base. No Ground Plane required so this can be mounted pretty much anywhere.

NGP antennas are designed to work without a ground plane, making them ideal for use on non-metallic surfaces. NGP antennas use a coil and capacitors to create a ground plane effect, making them ideal for use on fiberglass, RVs, boats, and other non-metallic surfaces.

The GMRS-POINT5 / UHF optimizes your GMRS radio by delivering the best signal performance throughout the programmed channels. Measuring a total of only 12.5", the POINT5 antenna packs big performance in a small size. Functions on any …

2025年2月27日 · UHF 450-470MHz 5dBd NMO. NMO mounting type. No-Ground Plane Antenna.

NGP - BAND ... 안녕들 하신가?

A properly functioning NGP system will outperform a standard CB system installed on a vehicle without enough metal. If you want to install an antenna on your truck topper, fiberglass RV, Motorcycle or UTV, an NGP antenna is the way to go.

We've manufactured this GO FURTHER antenna for optimum performance in the VHF range of frequencies. Its wide-band technology makes this antenna plug-and-play for all VHF applications. This "No Ground Plane" 1/2 wave base loaded antenna does not have to be attached to a metal surface (such as a vehicle roof or larger body panel.)

2018年12月28日 · I'm looking for a suitable antenna for my Jeep, which I use almost exclusively off road. The need is a no ground plane dual band antenna that's capable of transmitting across all 2M, 70cm, and GMRS frequencies. I'll spend most of the time on the 70cm and GMRS frequencies, so 440-470 MHz.

Arcadian, Inc. is a master stocking distributor of ANTENNAS for Cellular M2M, UHF RFID, Public Safety/LMR & iDAS. Arcadian also offers related wireless gear including antenna mounting brackets, coaxial cable, enclosures, connectors and cable assemblies.

2025年1月13日 · You can put two NMO antennas VHF and UHF unity gain on the roof of your truck. The VHF will be about 18.5 inches and the UHF about 6 inches. You will need a diplexer like a Comet to split the V and U bands assuming your hammy radio has one lone coax connector. It will work so much better and require no tuning.