2018年2月12日 · This indicates that notif was used for reasons other than reducing typing. † You might have noticed the usage of idk . Without getting too much into the nitty gritty of twitter slang, idk is indeed used as a true abbreviation, but it’s so ubiquitous that it’s essentially the canonical form of I don’t know now which makes it a somewhat ...

Hola Ing. Percy gracias por responder, Te comento, esta red yo la desconocía, actualmente intento explorarla cada vez mas ya que muchas que aparentemente están configuradas no están siendo utilizadas, tal es el caso de STP y Etherchannel que están configuradas con un enlace de respaldo o sumarizado y actualmente ya no se utiliza te comparto esa información:

Valentina, A MAC flap is detected, when a MAC address is learned on a new port within the 300-second CAM table refresh window. Normally in a properly configured network, that doesn't happen, because on Access layer switch, when you physically remove patch lead from one port and connect it to another, the original port goes to notconnected mode and all its MAC entries …

Could we tell where is the issue by the log below: Nov 20 2015 08:44:22.302 CST: %SW_MATM-4-MACFLAP_NOTIF: Host 0cc4.7a1d.21d4 in vlan 12 is flapping between port Gi3/0/7 and port Gi3/0/6

Aug 10 09:21:57.385 CST: %SW_MATM-4-MACFLAP_NOTIF: Host 0090.e800.0081 in vlan 1 is flapping between port Gi2/1/4 and port Gi2/1/3 Could you help to advise what going on? Thanks

Jul 11 13:32:48.104: %SW_MATM-4-MACFLAP_NOTIF: Host 3423.874a.dae5 in vlan 172 is flapping between port Gi1/0/39 and port Gi1/0/40 Cisco switch i generating these logs and after checking i found these two interfaces configured for standalone access points

Mar 23 16:19:23.459: %SW_MATM-4-MACFLAP_NOTIF: Host 0cd7.4674.20ce in vlan 10 is flapping between port Gi2/0/47 and port Gi1/0/1 I am running 8.3 on the controller. It was recommended to me to downgrade to 8.2

Hey Mike, 1. When using the show version command, you will see "Base ethernet MAC address: 0007.ECE1.5D18" in the output.

Thanks Keith for you reply,. I will test all your sugesstions. Basically i tested only 2 ports(fa0/5 & fa0/20) in second switch but i'll edit all the duplicate settings because i copied the first switch config to second switch after changomg the VLAN hsrp ip address.

Hi, Is it possible to gather all the logs using snmpwalk and what would be the equivalent command/oid for the current logging exist on the device buffer?