2018年5月18日 · Going through the tuning process, car goes into limp mode when it hits 5K RPM@ WOT. Pulled the code P0069 with diablo T2. Does anyone had experience with similar code and what causes it? Mods are: 2.75 upper ATI 10% lower Livernois dual fuel pump ID1300 E85 JBA CAT delete Car drives fine...

2022年12月29日 · Hey guys, I have a 2018 jeep grand Cherokee trackhawk. And I bought the car used with modifications done to it. Upper pulley, lower pulley, alkycontrol methanol kit, injectors, and cold air intake. I have a problem with my car going into limp mode at full throttle once rpms hit 6k and above. Getting codes, p0069, p012b, and p1643.

2015年3月11日 · During boost conditions, the Supercharger Inlet Pressure Sensor signal and BARO signal pressures should be similar. If the diagnostic fails during a drive cycle, a fault is set (P0069) and the secondary Supercharger Inlet Pressure Sensor rationality diagnostic is run to determine which sensor is irrational.

2016年1月1日 · During boost conditions, the Supercharger Inlet Pressure Sensor signal and BARO signal pressures should be similar. If the diagnostic fails during a drive cycle, a fault is set (P0069) and the secondary Supercharger Inlet Pressure Sensor rationality diagnostic is run to determine which sensor is irrational.

2018年6月14日 · Intermediate MAP (IMAP) Sensor On the Intake Manifold directly after the Supercharger P00F8, P00F9, P00FA, P00FB, P0607 P00E9, P00EA, P00EB

2017年3月28日 · 2019 Challenger Redeye Widebody - Indigo Blue 2016 Billet Silver Challenger - 1 of 6 Globally as Configured! (So

2015年9月9日 · P0069-MANIFOLD PRESSURE/BAROMETRIC PRESSURE CORRELATION The 6.2L engine uses several sensors to monitor the air pressure and temperature throughout the intake air system. The PCM uses this information to help calculate fuel delivery, ignition timing and Supercharger control. The PCM runs diagnostics to check the rationality of the sensors.

2016年4月3日 · During boost conditions, the Supercharger Inlet Pressure Sensor signal and BARO signal pressures should be similar. If the diagnostic fails during a drive cycle, a fault is set (P0069) and the secondary Supercharger Inlet Pressure Sensor rationality diagnostic is run to determine which sensor is irrational.

2017年9月13日 · With the engine running, if the P0069 or P1613 diagnostics have failed and become active, the Supercharger Inlet Pressure Sensor signal is compared to the Supercharger Outlet Pressure Sensor, Bank 1 MAP Sensor and Bank 2 MAP Sensor signals. Set Conditions:

pressures should be similar. If the diagnostic fails during a drive cycle, a fault is set (P0069) and the secondary Supercharger Inlet Pressure Sensor rationality diagnostic is run to determine which sensor is irrational. MAF/Supercharger Inlet Pressure Sensor rationality diagnostic check: