Sep 26, 2020 · I keep getting code P0752 - shift solenoid a stuck open. It doesn't like shifting from 1 to 2, and causes a bit of a shift spike between 2 and 3. I had a shop replace the solenoid, but we used an aftermarket part as it was more readily available. It has not solved the problem. What else can I do to solve this problem? Swap in an OEM part?

Jul 25, 2019 · It did end up moving but felt different. About 1/4 mile later tow/haul light starts flashing. Another mile the check engine light comes on. Would not shift into over drive. Get home and check codes, P0700 transmission control system MIL, P0752 shift solenoid A stuck on, P2700 transmission friction element A apply time range/performance.

Mar 6, 2013 · P0752 Gear box slip is greater than 100 RPM for 3 seconds. After reading the service manual further, i found, that first, i have to make sure the transmission fluid is ok, and then "Attempt to clean or free up a potential sticking valve with the …

Oct 23, 2012 · Do not plug it into the port with the vehicle ON. Plug it in first THEN turn the ignition key to ACC. Currently my "Cherry-Ot" is throughing 4 codes: P0422, P0469, P0700, & P0752 intermittently. Sometimes it has 1, sometimes it has 2 - in combinations of P0422/P0752 or P0469/P0700, or just P0422 or just P0469.

May 15, 2023 · 2007 element lx p0752 shift solenoid Jump to Latest 4.5K views 4 replies 3 participants last post by beelieve May 16, 2023

Feb 26, 2024 · My 2008 Enclave just set a transmission TCM code P0752,. After I had the code read at the parts store the light stayed on but the transmission started working fine.It would not shift out of what I believe was 2nd gear?? I think I would like to cancel the code and see what happens. Anybody have advice? The car has 140,000 easy miles on it,(wife ...

Jun 4, 2024 · Help!!!! p0171, u0140-00, u2100-00,c0450-5A, c0561-71, p0300, p0752, p0420, p1133, p0700 Tags engine smoke jerking multiple codes service stabilink service traction control

May 22, 2015 · enclave would not shift into 2nd gear. After parking for 2 hours the check engine light went away and the car drove normally for one day with no issues at any speed. However, this morning the check engine light came back on and the car will not shift into 3rd. The coder reader reads 0700 and...

May 19, 2018 · Knock on wood. Recently I got codes P0700 and P0752 with CEL and shifting symptoms similar to when my wave plate failed. I read up on the details and replaced the pressure switch discs in the transmission valve body. All were failed and probably any Enclave with this transmission has some level of failure.

Sep 13, 2018 · P0752 Shift solenoid "a" stuck on P0843 transmission FL press. switch "A" Circuit high did a 3x fill and drain immediately changed the 02 sensor and that code cleared replaced the 2nd gear pressure switch replaced the shift solenoid "a" (after dumping 3+ quarts of ATF DW-1 in a parking lot taking that cover off... i'm an idiot)