2015年2月16日 · The P1354 refers to the V.V.T. (variable valve timing) Oil Control Valve for Bank 2 (left/radiator side bank). The other codes all refer to Random misfires in cylinders 2,4,&6 (Bank 2/left/rad). There is extensive advice to be found on this problem, most of which concludes that you need to change the O.C.Valve.

2017年1月8日 · Yesterday my Highlander's engine light came on while driving. On that same drive I noticed three different things that I hadn't felt before in this car: 1. A sinister rumble/shudder while driving or idling, felt like it was coming from the …

2013年1月11日 · This is my first issue with my 09 road king. Everything was running great. My battery died, so I disconnected it to get a good charge on it. After connecting it back up, I started the bike and the engine light came on. I got the P1354 code. Everything points towards the ignition coil, but as far as I can tell, it looks good.

2015年1月9日 · P1354 seems to get set when the ECU commands a position and the sensor detects the cam didn't respond in a timely fashion or within some position tolerance. A clogged actuator filter, sticking actuator or a magnetic/electrical fault with the actuator or ECU connection are listed causes.

2014年3月14日 · P1354 Toyota Description: Variable Valve Timing (VVT) system controls the intake valve timing to proper timing in response to driving condition. The Engine Control Module ( ECM ) controls Oil Control Valve (OCV) to make the intake valve timing properly, and, oil pressure controlled with OCV is supplied to the VVT controller, and then, VVT ...

2023年4月18日 · Code P1354 Toyota Possible Causes Dirty or low engine oil Valve timing Oil control valve Variable Valve Timing controller assembly Engine Control Module (ECM) Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors.

2013年10月11日 · It was a P1354 code, which after looking up was the variable valve timing. This could have meant a few things; oil control valve, timing, ocv filter etc... I figured the oil control valve would be the cheapest ($72 @ advance auto) and the easiest to replace (10mm bolt).

2024年3月13日 · Hey Guys, I got a 2001 Toyota Highlander v6 and I keep running into CEL problems. The 3 codes I have are P0325, P0330, and P1354. I tried replacing the knock sensor harness and I drove it for about 10 minutes before the cel came back on. The first time I only had 2 codes, the P0325 and P1354. I...

2014年8月17日 · P1354 Bank 2 OCV I posted a tread a few years ago on this problem. To make a long story short, I initially bought two oil screens, which I never used, since the OEMs were not clogged. I always used synthetic oil and changed every 5000.

2007年3月28日 · I'm dealing with a friend's 99 ES300 which is throwing code P1354 and misfire codes for Cylinders 2, 4, and 6, all on Bank 2. When the car is cold, the car idles fine, but once the car is warm, the idle surges all the way to 1400-1500 rpm and stays there. The engine runs rough and misfire is very apparent.