Polyamide PA6 nylon rods are used to produce parts that work under high shock loads or in tribological systems. Polyamide 6 nylon rods are often used to replace metal parts in mechanical engineering and manufacturing. Polyamide 6 rods can withstand temperatures from …

Recalon® PA6 is recognized as the most widely used and known engineering plastic in the current market. PA6 has the best performance, very tough, even at low temperatures, and high surface hardness, mechanical lower shock, and abrasion resistance.

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties.

PA6 has the best performance, very tough, even at low temperatures, and high surface hardness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level material.

Polyamide 6 / Nylon tubes are multifunctional thermoplastic used for structural applications and with good antifriction properties. The PA6 polyamide rods are solid, tough, and durable. Nylon tubes of polyamide PA6 are used to manufacture parts operating at high shock loads or in tribological systems.

Polyamide 6 / Nylon rods are multifunctional thermoplastic used for structural applications and with good antifriction properties. The PA6 polyamide rods are solid, tough, and durable. Nylon Rods of polyamide PA6 are used to manufacture parts operating at high shock loads or in tribological systems.

The glass-filled polyamide rods are offering improved tensile, compressive, and flexural properties over the standard unfilled PA6 rods. The 30% Glass-Filled Nylon rods have an increased load-bearing degree and are good choice in applications where added stiffness, rigidity and dimensional stability are required.

PA6 (Polyamide Nylon) is recognized as the most widely used engineering plastic in the market today, with the most superior performance and very good toughness at low temperatures. It has high surface hardness, toughness, tensile strength, impact resistance, fatigue and wear resistance, and excellent folding resistance.

MC Nylon 6 + oil filled (PA6 + oil) - green: This internally lubricated cast nylon 6 is self-lubricating in the real meaning of the word. Oil filled MC nylon 6, especially developed for unlubricated, highly loaded and slowly moving parts applications, yields a considerable enlargement of the application possibilities of nylons.

Polyamide nylon 6 is the most commonly used nylon and this material has combined and balanced all typical properties of polyamide. Nylon 6 has great impact resistance, good damping property, and high toughness. These properties are still active even under low working temperature conditions.