While HDPE is crystalline enough to characterize further, this paper focuses on the capabilities of benchtop X-ray diffraction (XRD) to analyze the % crystallinity and crystallite size of the films. XRD has long been considered a gold standard method for material analysis.

According to previous research, the XRD patterns of three different types of microplastics (PE, PVC and PS) show two strong sharp peaks at 2 of 21.1° and 23.4° for PE, no sharp peak for PVC...

2024年5月7日 · 浪声桌面式界fringe xrd能够满足pe、pp结晶度测定的仪器分析所有技术要求，试样测试和计算简便、快速；分析数据精密、准确。 在正确制样条件下，所获测试结果与PE、PP结晶度的标称值相符。

Different grades of polyethylene, LLDPE and LDPE play a major role in the film blowing industry. The use of nanoclay in polymer matrices (non-polar) requires the use of a compatibilizer agent,...

A primary use of XRD in polymers is determination of the degree of crystallinity. The DOC is determined by integration of a 1-d XRD pattern such as that shown below for polyethylene. From Balta-Calleja and Vonk, "X-ray Scattering of Synthetic Polymers"

2024年11月15日 · XRD and polarized FTIR spectroscopy revealed the transformation of the initial spherulitic structure of PE into microfibrils composed of small crystalline blocks connected by amorphous chains oriented along the drawing direction.

In Fig. 2c, the XRD pattern of (WPE/DWR/EPDM)/CKD polymer composite which was irradiated at 100 (kGy) and loaded with 20 phr of CKD shows that the intensity is much higher when compared with...

结晶度比较高的样品，会有两个尖峰， (112) (200)晶面的，同时会在19°附近出现一个非晶的矮宽峰，是散射峰（不知大家怎么描述这种峰）。 结晶度低的，晶面衍射峰强度低，非晶的矮宽 …

2017年7月26日 · XRD pattern for the UHMW-PE fiber bundles. The patterns between 17 and 45° are obtained by an out-of-plane X-ray beam. The (002) peak around 75° is obtained by an in-plane X-ray beam.

2021年1月21日 · The simulated XRD pattern displays the shift in the peaks of PE (200) of the PE-EC-Li + model and PP (040) of PP-2EC-2Li + model, which are compatible with the in-situ XRD results. The ...