2025年1月7日 · The Pollutant Load Estimation Tool (PLET) is a planning level web-based model used to estimate long-term nutrient and sediment loads from different land uses and the load reductions resulting from the implementation of best management practices. What is PLET?

2016年2月17日 · The PipeLine End Termination (PLET) is a substructure required in a midline connection. While the connection point on a subsea facility, the Porch, is supported to seabed by the facility itself, the midline connections are stand-alone units on the seabed, and therefore require their own substructure.

eSubsea can perform PLEM engineering, procurement and construction (EPC) including 3D modelling and drawings, structural analysis, piping analysis, design and verification of PLEM Pipeline End Modules or Pipeline End Manifolds or PLET Pipeline End Terminations or FLET Flowline End Terminations.

2021年4月16日 · 深水油气田主要通过水下井口回接的方式进行油气开采，而PLET（海底管线终端）是用于连接海底管线和水下设施的重要组成部分，主要由防沉板、主体结构、Yoke、HUB平台、压力帽等组成。 PLET能否顺利高效安装，对项目至关重要。 本文从实际现场施工角度详细介绍了PLET使用PHS系统舷侧安装的工艺，为后续海上施工提供了宝贵经验和实践基础。 1 项目介绍陵水17-2气田位于琼东南盆地北部海域，水深为1220~1560m。 开发方案采用浮式平台方案，该 …

The Oil States Pipeline End Manifold (PLEM) and Pipeline End Termination (PLET) systems are typically used in new construction where a pipeline terminates or needs to be jumpered to another location, such as an FPSO, refinery, holding tank, etc. …

2016年2月7日 · The Pipeline End Termination (PLET) comprises a single pipeline connection only, while the Pipeline End Manifold (PLEM) is supporting two or more pipeline connections. A “pipe-to-pipe connection” can take place when a riser is connected to a subsea installed pipeline, or when an export flowline is connected to a spool.

Lewek Centurion is a self-propelled DP2 S-lay pipeline installation vessel, The vessel measures 146.5m long by 30m wide (35m wide included the external thrusters), with mean operating draft of 7.8 m. The pipe lay ramp is located on the center of …

PLEM (Pipeline end manifold) and PLET (Pipeline end termination) are subsea structures to attach subsea pipelines and pipeline ends. These equipment will have numerous components to direct, control or isolate the flow, with other functions such as chemical injection, pig launching and more as required based on project needs.

The Pipe Line End Termination (PLET) is a termination structure between the main pipeline and a rigid spool jumper or / flexible hose. The PLET consist of ROV operated Isolation WOM Single or Dual Gate Valves and hubs. It is installed within the pipeline by horizontal or vertical direction due to the first end or second installation.

The PLET is the termination point of the Tie in pipe and the connection point with flow line. PLET shall include interface section of the pipeline to allow installation of end cap, flowline tools (pig launcher/receiver) and a Tee branch to the Subsea Production manifold.