
Pipeline End Termination (PLET) – All About Pipeline
2016年2月17日 · Skid: The structural framework for the Open PLET. The Porch, mud-mat, guide-post and alignment bumpers are mounted on the skid. The skid must withstand all the loads exposed to the Open PLET during design life. Mud-mat: Prevents the Open PLET from sinking into the mud/seabed. The perforation ensures water current through the structure.
PLEM/PLET Structures - Oil States Industries
A PLET is the end or termination of a pipeline. The skid typically contains a male hub that serves as an attachment point for a jumper. The jumper utilizes a collet connector to make a permanent connection. There may also be other components on the skid such as ROV interface panels, ball valves and associated mud mats.
Pipeline Ending Manifold (PLEM)/PLET - Blogger
2016年2月7日 · The main components of Open PLET are: Skid: The structural framework for the Open PLET. The Porch, mud-mat, guide-post and alignment bumpers are mounted on the skid. The skid must withstand all the loads exposed to the Open PLET during design life. Mud-mat: Prevents the Open PLET from sinking into the mud/seabed.
1500m水深PLET海上安装工艺 - 道客巴巴
2021年4月16日 · 深水油气田主要通过水下井口回接的方式进行油气开采,而PLET(海底管线终端)是用于连接海底管线和水下设施的重要组成部分,主要由防沉板、主体结构、Yoke、HUB平台、压力帽等组成。 PLET能否顺利高效安装,对项目至关重要。
基于多体动力学的海底管线终端布放过程分析 - xml-data.cn
摘要:为了充分了解海底管线终端 (Pipeline end termination,PLET)布放动态过程,提高安装质量,本文基于多体动力学方法对PLET布放过程进行研究,采用经验公式确定各结构物上的水动力,建立了布放过程动力学仿真模型,通过开展PLET动态过程响应分析,得到流速 ...
PLEM Pipeline End Manifold Engineering, Design and Analysis
eSubsea can perform PLEM engineering, procurement and construction (EPC) including 3D modelling and drawings, structural analysis, piping analysis, design and verification of PLEM Pipeline End Modules or Pipeline End Manifolds or PLET Pipeline End Terminations or FLET Flowline End Terminations.
1500m水深PLET海上安装工艺 - 百度文库
深水油气田主要通过水下井口回接的 方式进行油气开采,而PLET(海底管线终端)是 用于连接海底管线和水下设施的重要组成部分, 主要由防沉板、主体结构、Yoke、HUB平台、压 力帽等组成。 PLET能否顺利高效安装,对项目 至关重要。 本文从实际现场施工角度详细介绍了 PLET使用PHS系统舷侧安装的工艺,为后续海上 施工提供了宝贵经验和实践基础。 (d)利用A-Frame液压组对系统进行组对,完 成焊接、检验(包括UT检验、盐分检测、包胶温 度检测、胶皮厚度检测 …
崖城项目管汇基盘PLET和PLEM的海上安装工艺 - 豆丁网
2016年4月29日 · 用履带吊整体安装改装后的PLET接近额定载荷,比较吃力;同时,由于PLET上部结构主体呈长方形,接近正方形,一端向上突出,连接了一个3连发球清管器,重心不在中心点,也正因为如此,第一次安装的时候吊装水平度调整非常困难,所以,现场改变安装方案 ...
水下嵌入式海管终端PLET设计及建造综述 - 豆丁网
2016年4月25日 · 海管终端PLET是水下生产系统的常见设. 施,为油气田水下回接提供接口。 番禺35-1. 解决方案,用于194~338m水深,首次在国内实现了嵌入式安装。 阐述了番禺35-1. 了宝贵经验。 nasea.. 生产系统已经成为深水开发中的重要模式。 一般水. )等。 接作用而造成的损坏。 湾3-1气田群,如图1所示。 水下生产系统通过. 湾3-1中心平台,最后回接至珠海高栏港陆地终端。 l:xiaodm@mail.cooec.com.cn。 番禺35-1支路152.4mm. 以上4套PLET均 …
Pipeline End Manifold (PLEM) / Pipeline End Terminal (PLET)
PLET is the termination of a pipeline. The system includes a male hub that is intended to be the attachment point for a jumper. Usually there are other components on the skid like ball valves with ROV interfaces and associated mud mats.
- 某些结果已被删除