
Pmod OLED - Digilent Reference
The Digilent Pmod OLED (Revision A) is an organic LED module with a 128×32 pixel display.
Pmod OLED Reference Manual - Digilent
The Digilent Pmod OLED (Revision A) is an organic LED module with a 128×32 pixel display. The Pmod OLED utilizes a Solomon Systech SSD1306 display controller to receive information from the host board and display the desired information on the OLED screen. The Pmod OLED communicates with the host board via the SPI protocol.
vivado-library/ip/Pmods/pmodOLEDrgb_v1_0/drivers/PmodOLEDrgb ... - GitHub
According ** to the bFill parameter, the rectangle is filled using fillColor (565 rgb ** value). */ void OLEDrgb_DrawRectangle (PmodOLEDrgb *InstancePtr, u8 c1, u8 r1, u8 c2, u8 r2, u16 …
basys3利用microblaze连接Pmod OLEDrgb - CSDN博客
2021年4月11日 · Basys 3开发板上的Pmod接口是连接外部设备的一个重要方式,它可以扩展FPGA的功能,使得开发板能够处理更多的输入输出任务。为了更好地利用这一特性,首先需要熟悉Pmod接口的物理特性和电气规格,确保与外部设备的...
Pmod OLED: 128 x 32 Pixel Monochromatic OLED Display
128×32 pixel graphic OLED display; Clock speeds of up to 10 MHz; Internal display buffer; 16 different brightness settings; Small PCB size for flexible designs; 12-pin Pmod connector with SPI interface; Library and example code available in resource center
- 评论数: 2
arturo182/pmod_rgb_oled_0.95in - GitHub
A tiny color OLED! Perfect solution if you need a small display with vivid, high-contrast 16-bit color. PMOD connector can be used with FPGA and MCU dev boards. The display itself is a 0.95" color OLED, the resolution is 96x64 RGB pixels. The display is driven by the SSD1331 IC, you can control it with a 4-wire write-only SPI.
Digilent PMOD OLED RGB Hardware Driver - GitHub
This is a work-in-progress (WIP) hardware driver implementation for the Digilent Pmod OLEDrgb Board. The aim of this project is to provide a simple means of using the Pmod OLEDrgb on the Zybo Z7 platform: Physical layer (PL) will be responsible for power on, power of, and boot configuration of the Pmod OLEDrgb
Pmod OLED - Add-on Boards - Digilent Forum
2017年11月23日 · The datasheet specific for the Pmod OLED can be found here. Note however, that not every function is built directly into the OLED driver chip; some of the functions, such as the clear buffer and put string functions are the host …
Pmod OledRGB - Add-on Boards - Digilent Forum
2020年2月14日 · As a medium skilled hw developer I'm was getting better at Xilinx workflow and interrupts/GPIO/UARTs, and was looking forward to using the Digilent PMOD OLEDrgb module with a custom board that I had developed a Vivado board file for (Seeed Spartan Edge Accelerator, Spartan-7 chip) with a PMOD connector/adapter (using some of its I/O pins).
The PmodOLED uses a standard 12-pin connector to display output on a 128x32 pixel organic LED (OLED) panel. The graphic display panel uses the Solomon Systech SSD1306 display controller. An SPI interface is used to configure the display, …
- 某些结果已被删除