The Digilent Pmod USBUART (Revision A) is a USB to UART Serial converter module capable of transfer rates upwards of 3 Mbaud. Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.

Pmods are designed to plug directly into Pmod host ports that adhere to the Digilent Pmod Interface Specification. Additionally, the Digilent Pmod Standard lays out guidelines for form factor, communication protocols and access to a target audience through reference manuals, code examples, user guides, and technical support.

Connect a keyboard, mouse, flash drive or other USB device to your FPGA development board or any system with a 12-pin Pmod™ compatible socket. Müsli has three jumper-configurable roles: Pmod™ compatible USB host bridge; Pmod™ compatible …

Müsli is a 12-pin Pmod™ compatible module with a RP2040 MCU and a USB type A port. Müsli can be configured to act as a USB host or USB device. In host mode the 5V USB VBUS power is supplied by a boost converter. This repo contains documentation, schematics and example host/device firmware. Find more information on the Müsli product page.

(1) Have you got the right COM port selected? This is most easily achieved by opening Device Manager and then plugging in the USB cable to the PMOD USB UART - the new device that pops up is the COM port you need to select. (2) Have you got RX and TX the right way round?

5 天之前 · The Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232R. Users may send data in either direction on the Pmod and receive the converted data in the appropriate format. NOTE: There are two UART signal pin assignment conventions in use on Digilent products. This product uses the new signal assignment convention.

(1) Have you got the right COM port selected? This is most easily achieved by opening Device Manager and then plugging in the USB cable to the PMOD USB UART - the new device that pops up is the COM port you need to select. (2) Have you got RX and TX the right way round?

The Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232R. Users may send data in either direction on the Pmod and receive the converted data in the appropriate format. Note: There are two UART signal pin assignment conventions in use on Digilent products. This product uses the new signal assignment convention.