2021年12月17日 · 此車的進氣口還流用RDX J37節氣門與美國inlet進氣喇叭口，有助於進氣流速與流量的提昇。 供油程式的補正是透過原廠ECU電腦，搭配Hondata程式來進行對應。

2024年5月30日 · I understand when using cams I'll need to upgrade the throttle body and injectors and from my research the RRC intake manifold has a 65mm inlet and the outlet of the J37 is somewhere around 69mm. Do I need to port my RRC or is there an adapter to taper down to the 65mm inlet?

2021年8月25日 · I need to know if it's safe to run my car from point A to point B to dyno tune, it's a 4 hours run, there is a basemap CAI, RBC intake, cat delete that i would run but it's for the stock injectors. Here's my setup: Skunk2 3,5 inches CAI, J37(ZDX) TB, TB …

2024年5月21日 · 2013 RDX. I have installed an AEM intake with a heat shield, that I gold taped, and I have welded my own custom exhaust from the stock J-pipe and back. It has a resonator and resonated tip I want to look into a throttle body/ IM upgrade to let it breathe better. The exhaust REALLY widened the torque curve

2022年5月15日 · The Honda J37 engine has made Ward’s top 10 list of best engines for its exceptional design and reliability throughout its lifespan. Many J37 drivers anticipate reaching the 180,000 – 200,000 mile mark without experiencing any severe repairs.

P2R is a one stop shop for all your J series needs. We have the widest range of OE & Performance parts for your J30, J32, J35, & J37 Engine. From simple parts like thermal gaskets & Fuel Rails, to complete Engine Builds with CNC Ported Heads.

2012年10月26日 · RDX injectors can be used with barely any mods. They don't "need" cams or boost either. And if I were going boosted, depending on my power output, i'd use something bigger than 410cc. For a supercharged, 300whp K20 or k24, I like 650-700cc injectors. My 00 k20a2 swapped Civic uses RDX injectors, and it's just a bolt on setup.

2012年7月8日 · First up a comparison between the J35 and the new J37 ZDX inside diameter. I had Honed out my Intake Manifold RBC inlet to 70mm prior to getting the J37 and then I did the same to the P2R adapter plate from 65mm to 70mm it all turned out great!

2013年3月8日 · Now my question is, is it worth going from my current RRC/J35 combo to a fully ported RBC/J37 combo? Any idea roughly what type of gains I could expect from this? A second part to that question is, would it be worth going to the RBC/J37 if only the inlet was port matched to 70mm, and the rest of the RBC was untouched?

2016年4月11日 · The J37 uses a die-cast aluminum block with aluminum cylinder liners. Primarily due to the cylinder liners being made from aluminum instead of cast-iron the engine weighs less than the J35Z engines. The intake manifold is made from a cast magnesium alloy.