Manuals for RME products not listed above are available as PDF versions on the RME website.

[email protected] . Was this topic helpful? Thank you! Thank you for letting us know. Please tell us what you were looking for: Your E-Mail (in case you would like us to contact you): Submit your feedback! Warranty and Support STATE Section ©2024 RME / m2lab Ltd. ...

Safety Precautions. ©2025 RME / m2lab Ltd.

In the web remote, open the analog input port.Each input is represented with a channel strip. Note that each channel strip becomes highlighted when the cursor hovers over it. Click or tap the first channel strip (avoiding the control buttons and encoder), and then swipe sideways to select a range of channels.

At 44.1 and 48 kHz, a maximum of eight channels can be transmitted per port. This amount is reduced to four channels at 88.2 and 96 kHz (double speed), and to two channels at 176.4 and 192 kHz (quad speed) respectively.

In many cases, the user forum at https://forum.rme-audio.de provides help with a simple search for relevant keywords. If the problem cannot be solved by any of the aforementioned methods, please have your serial number at hand and contact and your local dealer or distributor.

{"device":{"vendor_name":"RME Audio"}} The entire web remote application is based on this protocol. It is therefore possible to read the data payloads sent to the device when interacting with the web remote by using the "Network"-tab of the developer tools inside the browser.

The M-32 AD Pro II is a versatile multichannel format converter with exceptional audio quality across each of its channels. State-of-the art components from audiophile grade converters have been carefully aligned to fit into a compact, 1 HU 19" rack device.

Analog Output User Interfaces. The front TRS connector can be used for phones or as a balanced mono output. Any incoming signal can be routed to the phones output. Analog input signals can be temporarily routed to the phones output while the original routing remains saved.

Download the current firmware from the RME website. Unpack the compressed file. Open the Settings in the Web Remote.. Within the Firmware Update section, press the Select .swu Firmware File button and locate the unpacked file.. Press Start Firmware Update.